Aggregate Upgrade Problem

Support
1

I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server. I
keep getting HTTP Status 401. Any ideas?

Andy

2

Is this with your phone, or using your google account?

If it is using your Google account, then you may have mis-spelled your
account name when running the installer. Look in the application logs,
search for superUserEmail to see what e-mail account it is trying to match.

If it is from ODK Collect, you likely gave a different name for your
application on the first screen of the installer. Changing the application
name, if only by adding spaces or changing capitalizations, will invalidate
all ODK Aggregate passwords. The application string is the RealmString
displayed immediately above the superUserEmail in the logs. You might be
able to find the old string in an earlier log record (you can then re-run
the installer, using that as the application name, upload the changes, and
everything should start working again).

Mitch

··· On Wed, Apr 17, 2013 at 4:38 PM, Andrew Faust wrote:

I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server. I
keep getting HTTP Status 401. Any ideas?

Andy

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

3

OK now have a problem publishing to Google Fusion Tables and Spreadsheets.
I followed the instructions to Google OAuth2 Service Account and it seem
to go all ok. Now when I publish a form to Google I get this error.

Any ideas what is going wrong?

Andy

image

··· On Wednesday, April 17, 2013 6:38:37 PM UTC-5, Andrew Faust wrote: > > I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server. I > keep getting HTTP Status 401. Any ideas? > > Andy >
4

using my Google account to log into Aggregate What log should I be looking
into?

··· On Wednesday, April 17, 2013 7:11:26 PM UTC-5, Mitch wrote: > > Is this with your phone, or using your google account? > > If it is using your Google account, then you may have mis-spelled your > account name when running the installer. Look in the application logs, > search for superUserEmail to see what e-mail account it is trying to match. > > If it is from ODK Collect, you likely gave a different name for your > application on the first screen of the installer. Changing the application > name, if only by adding spaces or changing capitalizations, will invalidate > all ODK Aggregate passwords. The application string is the RealmString > displayed immediately above the superUserEmail in the logs. You might be > able to find the old string in an earlier log record (you can then re-run > the installer, using that as the application name, upload the changes, and > everything should start working again). > > Mitch > > > > On Wed, Apr 17, 2013 at 4:38 PM, Andrew Faust <afa...@ncwrpc.org wrote: > >> I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server. >> I keep getting HTTP Status 401. Any ideas? >> >> Andy >> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com >
5

That is this issue:
http://code.google.com/p/opendatakit/issues/detail?id=776

Google is confused. Work-around is to publish to a @gmail.com account.

··· On Thu, Apr 18, 2013 at 11:14 AM, Andrew Faust wrote:

OK now have a problem publishing to Google Fusion Tables and Spreadsheets.
I followed the instructions to Google OAuth2 Service Account and it seem
to go all ok. Now when I publish a form to Google I get this error.

Any ideas what is going wrong?

Andy

On Wednesday, April 17, 2013 6:38:37 PM UTC-5, Andrew Faust wrote:

I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server.
I keep getting HTTP Status 401. Any ideas?

Andy

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

6

Seems to be working now. Not sure why yesterday it would not let me log in
with my Google Account

Andy

··· On Wednesday, April 17, 2013 8:05:11 PM UTC-5, Andrew Faust wrote: > > using my Google account to log into Aggregate What log should I be > looking into? > > On Wednesday, April 17, 2013 7:11:26 PM UTC-5, Mitch wrote: >> >> Is this with your phone, or using your google account? >> >> If it is using your Google account, then you may have mis-spelled your >> account name when running the installer. Look in the application logs, >> search for superUserEmail to see what e-mail account it is trying to match. >> >> If it is from ODK Collect, you likely gave a different name for your >> application on the first screen of the installer. Changing the application >> name, if only by adding spaces or changing capitalizations, will invalidate >> all ODK Aggregate passwords. The application string is the RealmString >> displayed immediately above the superUserEmail in the logs. You might be >> able to find the old string in an earlier log record (you can then re-run >> the installer, using that as the application name, upload the changes, and >> everything should start working again). >> >> Mitch >> >> >> >> On Wed, Apr 17, 2013 at 4:38 PM, Andrew Faust wrote: >> >>> I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server. >>> I keep getting HTTP Status 401. Any ideas? >>> >>> Andy >>> >>> -- >>> -- >>> Post: opend...@googlegroups.com >>> Unsubscribe: opendatakit...@googlegroups.com >>> Options: http://groups.google.com/group/opendatakit?hl=en >>> >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "ODK Community" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to opendatakit...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> >>> >> >> >> >> -- >> Mitch Sundt >> Software Engineer >> University of Washington >> mitche...@gmail.com >> >
7

Do you think that will get fixed?

··· On Thursday, April 18, 2013 1:38:56 PM UTC-5, Mitch wrote: > > That is this issue: > http://code.google.com/p/opendatakit/issues/detail?id=776 > > Google is confused. Work-around is to publish to a @gmail.com account. > > > > > On Thu, Apr 18, 2013 at 11:14 AM, Andrew Faust <afa...@ncwrpc.org wrote: > >> OK now have a problem publishing to Google Fusion Tables and >> Spreadsheets. I followed the instructions to Google OAuth2 Service >> Account and it seem to go all ok. Now when I publish a form to Google I >> get this error. >> >> Any ideas what is going wrong? >> >> Andy >> >> On Wednesday, April 17, 2013 6:38:37 PM UTC-5, Andrew Faust wrote: >>> >>> I upgraded from 1.2 to 1.3.1 and now I am unable to log into the server. >>> I keep getting HTTP Status 401. Any ideas? >>> >>> Andy >>> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com >
8

I'm hoping to get further info from Google at Google I/O in mid-May.

Mitch

··· On Thu, Apr 18, 2013 at 12:07 PM, Andrew Faust wrote:

Do you think that will get fixed?

On Thursday, April 18, 2013 1:38:56 PM UTC-5, Mitch wrote:

That is this issue: http://code.google.com/p/**
opendatakit/issues/detail?id=**776http://code.google.com/p/opendatakit/issues/detail?id=776

Google is confused. Work-around is to publish to a @gmail.com account.

On Thu, Apr 18, 2013 at 11:14 AM, Andrew Faust afa...@ncwrpc.org wrote:

OK now have a problem publishing to Google Fusion Tables and
Spreadsheets. I followed the instructions to Google OAuth2 Service
Account and it seem to go all ok. Now when I publish a form to Google I
get this error.

Any ideas what is going wrong?

Andy

On Wednesday, April 17, 2013 6:38:37 PM UTC-5, Andrew Faust wrote:

I upgraded from 1.2 to 1.3.1 and now I am unable to log into the
server. I keep getting HTTP Status 401. Any ideas?

Andy

--

Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@**googlegroups.com

Options: http://groups.google.com/**group/opendatakit?hl=enhttp://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@**googlegroups.com.

For more options, visit https://groups.google.com/**groups/opt_outhttps://groups.google.com/groups/opt_out
.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com