Becky
Can you browse to your ODK Aggregate and log onto it? (i.e., are you out
of quota?)
I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/
- Hi guys.
- I am consistently getting the error: 'Sorry, the data server for
your form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
Dear All,
I have uploaded my form into ODK Aggregate and I am able to access it on my ODK Collect. However, when I fill the form and wants to submit it to ODK Aggregate its just timing out without sending it to the server?
Any one who have came across this problem to help?
Viny
Unfortunately I have just run out of quota and cannot logon and browse to
it....however this has only just happened.
It is strange - I have been able to submit completed forms for the sample
xls form that ODK provides...but not for the one that I have created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be
something wrong with my form I suspect? ...although I cannot find anything
wrong.
Thank you so much for responding to me. Very much appreciated.
Becky
Can you browse to your ODK Aggregate and log onto it? (i.e., are you out
of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlstedham@gmail.com wrote:
- Hi guys.
- I am consistently getting the error: 'Sorry, the data server for
your form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hi Viny,
Is this Enketo related or ODK Collect related? It might deserves it's own
discussino thread.
For reference, the earlier 'NaN' issue in this thread can be monitored
here: https://github.com/opendatakit/opendatakit/issues/1116
Cheers,
Dear All,
I have uploaded my form into ODK Aggregate and I am able to access it on
my ODK Collect. However, when I fill the form and wants to submit it to ODK
Aggregate its just timing out without sending it to the server?Any one who have came across this problem to help?
Viny
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Revolutionizing data collection since 2012.
Enketo https://enketo.org/ | LinkedIn
http://www.linkedin.com/company/enketo-llc | GitHub
https://github.com/enketo | Twitter https://twitter.com/enketo
| Blog http://blog.enketo.org/
If the form can be uploaded to ODK Aggregate, you should be able to submit
completed forms to it.
Note that the form has to be uploaded to ODK Aggregate before you can
submit to it.
Unfortunately I have just run out of quota and cannot logon and browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the sample
xls form that ODK provides...but not for the one that I have created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be
something wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are you out
of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlstedham@gmail.com wrote:
- Hi guys.
- I am consistently getting the error: 'Sorry, the data server for
your form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
yes, it can (and has been) uploaded to ODK Aggregate. However when I submit
a form online using Enketo, it says that the server is down. I attach the
xls and xml equivalent to this ...to see if you can easily see where I have
gone wrong.
Becky
sample_xlsformrs.xml (290 KB)
sample_xlsformrs.xls (185 KB)
If the form can be uploaded to ODK Aggregate, you should be able to submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Unfortunately I have just run out of quota and cannot logon and browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the sample
xls form that ODK provides...but not for the one that I have created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be
something wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlstedham@gmail.com wrote:
- Hi guys.
- I am consistently getting the error: 'Sorry, the data server for
your form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Rebecca,
This is an issue that Martijn from Enketo is best positioned to help
with. I've cc'ed him.
Yaw
On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham rlstedham@gmail.com wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However when I submit
a form online using Enketo, it says that the server is down. I attach the
xls and xml equivalent to this ...to see if you can easily see where I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able to submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Unfortunately I have just run out of quota and cannot logon and browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the sample
xls form that ODK provides...but not for the one that I have created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be something
wrong with my form I suspect? ...although I cannot find anything wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlstedham@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server for your
form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Thanks! Really appreciated!
On 9 Jul 2014, at 17:12, Yaw Anokwa yanokwa@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham rlstedham@gmail.com wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However when I submit
a form online using Enketo, it says that the server is down. I attach the
xls and xml equivalent to this ...to see if you can easily see where I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able to submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Unfortunately I have just run out of quota and cannot logon and browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the sample
xls form that ODK provides...but not for the one that I have created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be something
wrong with my form I suspect? ...although I cannot find anything wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlstedham@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server for your
form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the Google Groups "ODK Community" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Glancing through, you have a group called
F.forest_products
I am surprised that XLSForm accepts that and that it is even possible to
upload this to ODK Aggregate. Remove the period, and my guess is that it
will start working.
Group and field names should begin with an alphabetic character, only
consist of alphabetic characters, digits and underscores; dashes are OK,
but may cause trouble in downstream systems (e.g., Javascript publishers).
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yanokwa@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham rlstedham@gmail.com wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However when I
submit
a form online using Enketo, it says that the server is down. I attach
the
xls and xml equivalent to this ...to see if you can easily see where I
have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Unfortunately I have just run out of quota and cannot logon and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be
something
wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitchellsundt@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlstedham@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server for
your
form or the Enketo server is down. Please try again later or contact
support@enketo.org please'I am using ODK aggregate server ...could anyone point me in the
right
direction for working through this?Becky
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
Sorry for my late response but I believe we're communicating outside this
forum too. Let's continue this here.
Rebecca, did you try working around the issue that Mitch discovered and if
so did this fix it for you? Did you manage to get ODK Aggregate working
properly (with the /formList URL functioning)?
If the workaround did not work and Aggregate is functioning properly, let
me know. I'll investigate further in the next few days.
Cheers,
Martijn
Hi Mitch,
I did make the amendment suggested but unfortunately it still is not
working. I have been reading through online information about syntax
(through formhubs website) and can't seem to see anything.
I have attached the xls form.
Any help you could provide is greatly appreciated - its for some
development work in mozambique. ..but appreciate that you no doubt have
lots of other things on!
Thanks again
Becky
aces.xls (212 KB)
Sorry for my late response but I believe we're communicating outside this
forum too. Let's continue this here.Rebecca, did you try working around the issue that Mitch discovered and if
so did this fix it for you? Did you manage to get ODK Aggregate working
properly (with the /formList URL functioning)?If the workaround did not work and Aggregate is functioning properly, let
me know. I'll investigate further in the next few days.Cheers,
MartijnOn Wednesday, July 9, 2014 12:06:57 PM UTC-6, Mitch Sundt wrote:
Glancing through, you have a group called
F.forest_products
I am surprised that XLSForm accepts that and that it is even possible to
upload this to ODK Aggregate. Remove the period, and my guess is that it
will start working.Group and field names should begin with an alphabetic character, only
consist of alphabetic characters, digits and underscores; dashes are OK,
but may cause trouble in downstream systems (e.g., Javascript publishers).On Wed, Jul 9, 2014 at 10:03 AM, Rebecca Stedham rlst...@gmail.com wrote:
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yan...@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham rlst...@gmail.com wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However when I
submit
a form online using Enketo, it says that the server is down. I attach
the
xls and xml equivalent to this ...to see if you can easily see where
I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt mitche...@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham rlst...@gmail.com wrote:
Unfortunately I have just run out of quota and cannot logon and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to xml using
xlsform...and can be viewed and completed in enketo. So it must be
something
wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitche...@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are
you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlst...@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server for
your
form or the Enketo server is down. Please try again later or
contact
sup...@enketo.org please'I am using ODK aggregate server ...could anyone point me in the
right
direction for working through this?Becky
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Becky,
There's nothing obviously wrong with your form. Have you tried using
ODK Collect to see if that submission goes through OK?
Yaw
On Thu, Jul 10, 2014 at 7:43 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Hi Mitch,
I did make the amendment suggested but unfortunately it still is not
working. I have been reading through online information about syntax
(through formhubs website) and can't seem to see anything.
- the original form is easily uploaded to my server as an xml
- the original sample xls (found online) form is easily uploaded to the
server- the original sample xls form ican be completed online through ENKETO and
submitted to the server- my xls form can be completed through enketo but cannot be submitted to
server as it says server is down.I have attached the xls form.
Any help you could provide is greatly appreciated - its for some development
work in mozambique. ..but appreciate that you no doubt have lots of other
things on!Thanks again
Becky
On Thu, Jul 10, 2014 at 3:33 PM, Martijn van de Rijdt martijn@enketo.org wrote:
Sorry for my late response but I believe we're communicating outside this
forum too. Let's continue this here.Rebecca, did you try working around the issue that Mitch discovered and if
so did this fix it for you? Did you manage to get ODK Aggregate working
properly (with the /formList URL functioning)?If the workaround did not work and Aggregate is functioning properly, let
me know. I'll investigate further in the next few days.Cheers,
MartijnOn Wednesday, July 9, 2014 12:06:57 PM UTC-6, Mitch Sundt wrote:
Glancing through, you have a group called F.forest_products
I am surprised that XLSForm accepts that and that it is even possible to
upload this to ODK Aggregate. Remove the period, and my guess is that it
will start working.Group and field names should begin with an alphabetic character, only
consist of alphabetic characters, digits and underscores; dashes are OK, but
may cause trouble in downstream systems (e.g., Javascript publishers).On Wed, Jul 9, 2014 at 10:03 AM, Rebecca Stedham rlst...@gmail.com wrote:
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yan...@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham rlst...@gmail.com wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However when I
submit
a form online using Enketo, it says that the server is down. I attach
the
xls and xml equivalent to this ...to see if you can easily see where
I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt mitche...@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you
can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham rlst...@gmail.com wrote:
Unfortunately I have just run out of quota and cannot logon and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to xml
using
xlsform...and can be viewed and completed in enketo. So it must be
something
wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt mitche...@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e., are
you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlst...@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server for
your
form or the Enketo server is down. Please try again later or
contact
sup...@enketo.org please'I am using ODK aggregate server ...could anyone point me in the
right
direction for working through this?Becky
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
And if you find that the submission from ODK Collect is rejected, please
zip up your /odk directory, and send it to me ( mitchellsundt@gmail.com ).
I can then begin debugging ODK Aggregate.
If that submission works, then if you are using Google AppEngine, look in
your application (appspot instance) log ( reachable via Appengine
https://appengine.google.com/ ) to see if there is an error associated
with the Enketo submission.
Becky,
There's nothing obviously wrong with your form. Have you tried using
ODK Collect to see if that submission goes through OK?Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Thu, Jul 10, 2014 at 7:43 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Hi Mitch,
I did make the amendment suggested but unfortunately it still is not
working. I have been reading through online information about syntax
(through formhubs website) and can't seem to see anything.
- the original form is easily uploaded to my server as an xml
- the original sample xls (found online) form is easily uploaded to the
server- the original sample xls form ican be completed online through ENKETO
and
submitted to the server- my xls form can be completed through enketo but cannot be submitted to
server as it says server is down.I have attached the xls form.
Any help you could provide is greatly appreciated - its for some
development
work in mozambique. ..but appreciate that you no doubt have lots of other
things on!Thanks again
Becky
On Thu, Jul 10, 2014 at 3:33 PM, Martijn van de Rijdt < martijn@enketo.org> wrote:
Sorry for my late response but I believe we're communicating outside
this
forum too. Let's continue this here.Rebecca, did you try working around the issue that Mitch discovered and
if
so did this fix it for you? Did you manage to get ODK Aggregate working
properly (with the /formList URL functioning)?If the workaround did not work and Aggregate is functioning properly,
let
me know. I'll investigate further in the next few days.Cheers,
MartijnOn Wednesday, July 9, 2014 12:06:57 PM UTC-6, Mitch Sundt wrote:
Glancing through, you have a group called F.forest_products
I am surprised that XLSForm accepts that and that it is even possible
to
upload this to ODK Aggregate. Remove the period, and my guess is that
it
will start working.Group and field names should begin with an alphabetic character, only
consist of alphabetic characters, digits and underscores; dashes are
OK, but
may cause trouble in downstream systems (e.g., Javascript publishers).On Wed, Jul 9, 2014 at 10:03 AM, Rebecca Stedham rlst...@gmail.com wrote:
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yan...@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham <rlst...@gmail.com wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However when
I
submit
a form online using Enketo, it says that the server is down. I
attach
the
xls and xml equivalent to this ...to see if you can easily see
where
I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt mitche...@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able
to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you
can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
Unfortunately I have just run out of quota and cannot logon and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for
the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to xml
using
xlsform...and can be viewed and completed in enketo. So it must
be
something
wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt <mitche...@gmail.com wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e.,
are
you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlst...@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server
for
your
form or the Enketo server is down. Please try again later or
contact
sup...@enketo.org please'I am using ODK aggregate server ...could anyone point me in the
right
direction for working through this?Becky
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from
it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic
in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
Good morning,
After having a thorough scan of the xls form yesterday morning and removing
'<1' in the options spreadsheet I have now tried to resubmit again (I ran
out of google apps quota yesterday so could not persist with submission
attempts)..and it has worked.
I will spend a little time to check it is working for sure...but looks good
so far.
Thank you so much for your responses and support. It does not go
unappreciated!
Have a wonderful day
Becky
And if you find that the submission from ODK Collect is rejected, please
zip up your /odk directory, and send it to me ( mitchellsundt@gmail.com
). I can then begin debugging ODK Aggregate.If that submission works, then if you are using Google AppEngine, look in
your application (appspot instance) log ( reachable via Appengine
https://appengine.google.com/ ) to see if there is an error associated
with the Enketo submission.On Thu, Jul 10, 2014 at 8:03 AM, Yaw Anokwa yanokwa@nafundi.com wrote:
Becky,
There's nothing obviously wrong with your form. Have you tried using
ODK Collect to see if that submission goes through OK?Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Thu, Jul 10, 2014 at 7:43 AM, Rebecca Stedham rlstedham@gmail.com wrote:
Hi Mitch,
I did make the amendment suggested but unfortunately it still is not
working. I have been reading through online information about syntax
(through formhubs website) and can't seem to see anything.
- the original form is easily uploaded to my server as an xml
- the original sample xls (found online) form is easily uploaded to the
server- the original sample xls form ican be completed online through ENKETO
and
submitted to the server- my xls form can be completed through enketo but cannot be submitted to
server as it says server is down.I have attached the xls form.
Any help you could provide is greatly appreciated - its for some
development
work in mozambique. ..but appreciate that you no doubt have lots of
other
things on!Thanks again
Becky
On Thu, Jul 10, 2014 at 3:33 PM, Martijn van de Rijdt < martijn@enketo.org> wrote:
Sorry for my late response but I believe we're communicating outside
this
forum too. Let's continue this here.Rebecca, did you try working around the issue that Mitch discovered
and if
so did this fix it for you? Did you manage to get ODK Aggregate working
properly (with the /formList URL functioning)?If the workaround did not work and Aggregate is functioning properly,
let
me know. I'll investigate further in the next few days.Cheers,
MartijnOn Wednesday, July 9, 2014 12:06:57 PM UTC-6, Mitch Sundt wrote:
Glancing through, you have a group called F.forest_products
I am surprised that XLSForm accepts that and that it is even possible
to
upload this to ODK Aggregate. Remove the period, and my guess is that
it
will start working.Group and field names should begin with an alphabetic character, only
consist of alphabetic characters, digits and underscores; dashes are
OK, but
may cause trouble in downstream systems (e.g., Javascript publishers).On Wed, Jul 9, 2014 at 10:03 AM, Rebecca Stedham rlst...@gmail.com wrote:
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yan...@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to
help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However
when I
submit
a form online using Enketo, it says that the server is down. I
attach
the
xls and xml equivalent to this ...to see if you can easily see
where
I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt <mitche...@gmail.com wrote:
If the form can be uploaded to ODK Aggregate, you should be able
to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before you
can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
Unfortunately I have just run out of quota and cannot logon and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms for
the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to xml
using
xlsform...and can be viewed and completed in enketo. So it must
be
something
wrong with my form I suspect? ...although I cannot find anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt < mitche...@gmail.com> wrote:
Can you browse to your ODK Aggregate and log onto it? (i.e.,
are
you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlst...@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data server
for
your
form or the Enketo server is down. Please try again later or
contact
sup...@enketo.org please'I am using ODK aggregate server ...could anyone point me in
the
right
direction for working through this?Becky
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from
it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a
topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from
it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic
in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Glad you worked around this issue Becky. Thanks for letting us know!
I want to add that I think it's generally better to keep the "name" in your
choice lists short and simple. The name will be the value you'll see in the
records collected with this form and simple meaningful names make analysis
easier. I also definitely recommend to not use spaces for these names (the
reason for this is that multi-selects use space-separated lists of values),
though it's sort of allowed for select_one questions.
@mitch, I confirmed that Aggregate won't accept any submissions for that
form. It returns a 500 Unexpected Exception. I could not reproduce it with
a simplified test form, and don't think the <1 and >1 choice names are the
cause. I confirmed that the XML submission sent by Enketo is well-formed. I
have attached a problematic submission for the form sample_xlsformrs.xml
that Becky attached early in this thread. The issue does not occur on
formhub. I also could not reproduce it with ODK Collect and Aggregate. I
suspect this may be because of the small differences between the clients
about which (empty) nodes/repeats to include in the submission.
DgrUqtpeDX.xml (13.5 KB)
Thanks Martijn,
The error in the submission is in these two fields:
<derived_forest_product_input_value>NaN</derived_forest_product_input_value>
<fish_gross_value>NaN</fish_gross_value>
Somehow they got a NaN as a value. The decimal value parsing fails,
causing the form to fail to be uploaded.
Glad you worked around this issue Becky. Thanks for letting us know!
I want to add that I think it's generally better to keep the "name" in
your choice lists short and simple. The name will be the value you'll see
in the records collected with this form and simple meaningful names make
analysis easier. I also definitely recommend to not use spaces for these
names (the reason for this is that multi-selects use space-separated lists
of values), though it's sort of allowed for select_one questions.@mitch, I confirmed that Aggregate won't accept any submissions for that
form. It returns a 500 Unexpected Exception. I could not reproduce it with
a simplified test form, and don't think the <1 and >1 choice names are the
cause. I confirmed that the XML submission sent by Enketo is well-formed. I
have attached a problematic submission for the form sample_xlsformrs.xml
that Becky attached early in this thread. The issue does not occur on
formhub. I also could not reproduce it with ODK Collect and Aggregate. I
suspect this may be because of the small differences between the clients
about which (empty) nodes/repeats to include in the submission.On Friday, July 11, 2014 2:18:27 AM UTC-6, Rebecca Stedham wrote:
Good morning,
After having a thorough scan of the xls form yesterday morning and
removing '<1' in the options spreadsheet I have now tried to resubmit again
(I ran out of google apps quota yesterday so could not persist with
submission attempts)..and it has worked.I will spend a little time to check it is working for sure...but looks
good so far.Thank you so much for your responses and support. It does not go
unappreciated!Have a wonderful day
Becky
On Thu, Jul 10, 2014 at 11:09 PM, Mitch Sundt mitche...@gmail.com wrote:
And if you find that the submission from ODK Collect is rejected, please
zip up your /odk directory, and send it to me ( mitche...@gmail.com ).
I can then begin debugging ODK Aggregate.If that submission works, then if you are using Google AppEngine, look
in your application (appspot instance) log ( reachable via Appengine
https://appengine.google.com/ ) to see if there is an error
associated with the Enketo submission.On Thu, Jul 10, 2014 at 8:03 AM, Yaw Anokwa yan...@nafundi.com wrote:
Becky,
There's nothing obviously wrong with your form. Have you tried using
ODK Collect to see if that submission goes through OK?Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Thu, Jul 10, 2014 at 7:43 AM, Rebecca Stedham rlst...@gmail.com wrote:
Hi Mitch,
I did make the amendment suggested but unfortunately it still is not
working. I have been reading through online information about syntax
(through formhubs website) and can't seem to see anything.
- the original form is easily uploaded to my server as an xml
- the original sample xls (found online) form is easily uploaded to
the
server- the original sample xls form ican be completed online through
ENKETO and
submitted to the server- my xls form can be completed through enketo but cannot be submitted
to
server as it says server is down.I have attached the xls form.
Any help you could provide is greatly appreciated - its for some
development
work in mozambique. ..but appreciate that you no doubt have lots of
other
things on!Thanks again
Becky
On Thu, Jul 10, 2014 at 3:33 PM, Martijn van de Rijdt < mar...@enketo.org> wrote:
Sorry for my late response but I believe we're communicating outside
this
forum too. Let's continue this here.Rebecca, did you try working around the issue that Mitch discovered
and if
so did this fix it for you? Did you manage to get ODK Aggregate
working
properly (with the /formList URL functioning)?If the workaround did not work and Aggregate is functioning
properly, let
me know. I'll investigate further in the next few days.Cheers,
MartijnOn Wednesday, July 9, 2014 12:06:57 PM UTC-6, Mitch Sundt wrote:
Glancing through, you have a group called F.forest_products
I am surprised that XLSForm accepts that and that it is even
possible to
upload this to ODK Aggregate. Remove the period, and my guess is
that it
will start working.Group and field names should begin with an alphabetic character,
only
consist of alphabetic characters, digits and underscores; dashes
are OK, but
may cause trouble in downstream systems (e.g., Javascript
publishers).On Wed, Jul 9, 2014 at 10:03 AM, Rebecca Stedham <rlst...@gmail.com wrote:
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yan...@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to
help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design,
server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However
when I
submit
a form online using Enketo, it says that the server is down. I
attach
the
xls and xml equivalent to this ...to see if you can easily see
where
I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt < mitche...@gmail.com> wrote:
If the form can be uploaded to ODK Aggregate, you should be
able to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before
you
can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
Unfortunately I have just run out of quota and cannot logon
and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms
for the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to xml
using
xlsform...and can be viewed and completed in enketo. So it
must be
something
wrong with my form I suspect? ...although I cannot find
anything
wrong.Thank you so much for responding to me. Very much appreciated.
Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt < mitche...@gmail.com> wrote:
Can you browse to your ODK Aggregate and log onto it?
(i.e., are
you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlst...@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data
server for
your
form or the Enketo server is down. Please try again later or
contact
sup...@enketo.org please'I am using ODK aggregate server ...could anyone point me in
the
right
direction for working through this?Becky
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails
from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a
topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from
it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a
topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an
email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from
it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic
in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an email
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
Thanks a lot for checking into this Mitch.
I have opened a thread on the developer forum for this:
https://groups.google.com/forum/#!topic/opendatakit-developers/fqJhZqPEI5Q
Thanks Martijn,
The error in the submission is in these two fields:
<derived_forest_product_input_value>*NaN*</derived_forest_product_input_value> <fish_gross_value>*NaN*</fish_gross_value>Somehow they got a NaN as a value. The decimal value parsing fails,
causing the form to fail to be uploaded.On Sat, Jul 12, 2014 at 12:26 PM, Martijn van de Rijdt <martijn@enketo.org wrote:
Glad you worked around this issue Becky. Thanks for letting us know!
I want to add that I think it's generally better to keep the "name" in
your choice lists short and simple. The name will be the value you'll see
in the records collected with this form and simple meaningful names make
analysis easier. I also definitely recommend to not use spaces for these
names (the reason for this is that multi-selects use space-separated lists
of values), though it's sort of allowed for select_one questions.@mitch, I confirmed that Aggregate won't accept any submissions for that
form. It returns a 500 Unexpected Exception. I could not reproduce it with
a simplified test form, and don't think the <1 and >1 choice names are the
cause. I confirmed that the XML submission sent by Enketo is well-formed. I
have attached a problematic submission for the form sample_xlsformrs.xml
that Becky attached early in this thread. The issue does not occur on
formhub. I also could not reproduce it with ODK Collect and Aggregate. I
suspect this may be because of the small differences between the clients
about which (empty) nodes/repeats to include in the submission.On Friday, July 11, 2014 2:18:27 AM UTC-6, Rebecca Stedham wrote:
Good morning,
After having a thorough scan of the xls form yesterday morning and
removing '<1' in the options spreadsheet I have now tried to resubmit again
(I ran out of google apps quota yesterday so could not persist with
submission attempts)..and it has worked.I will spend a little time to check it is working for sure...but looks
good so far.Thank you so much for your responses and support. It does not go
unappreciated!Have a wonderful day
Becky
On Thu, Jul 10, 2014 at 11:09 PM, Mitch Sundt mitche...@gmail.com wrote:
And if you find that the submission from ODK Collect is rejected,
please zip up your /odk directory, and send it to me (
mitche...@gmail.com ). I can then begin debugging ODK Aggregate.If that submission works, then if you are using Google AppEngine, look
in your application (appspot instance) log ( reachable via Appengine
https://appengine.google.com/ ) to see if there is an error
associated with the Enketo submission.On Thu, Jul 10, 2014 at 8:03 AM, Yaw Anokwa yan...@nafundi.com wrote:
Becky,
There's nothing obviously wrong with your form. Have you tried using
ODK Collect to see if that submission goes through OK?Yaw
Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.On Thu, Jul 10, 2014 at 7:43 AM, Rebecca Stedham rlst...@gmail.com wrote:
Hi Mitch,
I did make the amendment suggested but unfortunately it still is not
working. I have been reading through online information about syntax
(through formhubs website) and can't seem to see anything.
- the original form is easily uploaded to my server as an xml
- the original sample xls (found online) form is easily uploaded to
the
server- the original sample xls form ican be completed online through
ENKETO and
submitted to the server- my xls form can be completed through enketo but cannot be
submitted to
server as it says server is down.I have attached the xls form.
Any help you could provide is greatly appreciated - its for some
development
work in mozambique. ..but appreciate that you no doubt have lots of
other
things on!Thanks again
Becky
On Thu, Jul 10, 2014 at 3:33 PM, Martijn van de Rijdt < mar...@enketo.org> wrote:
Sorry for my late response but I believe we're communicating
outside this
forum too. Let's continue this here.Rebecca, did you try working around the issue that Mitch discovered
and if
so did this fix it for you? Did you manage to get ODK Aggregate
working
properly (with the /formList URL functioning)?If the workaround did not work and Aggregate is functioning
properly, let
me know. I'll investigate further in the next few days.Cheers,
MartijnOn Wednesday, July 9, 2014 12:06:57 PM UTC-6, Mitch Sundt wrote:
Glancing through, you have a group called F.forest_products
I am surprised that XLSForm accepts that and that it is even
possible to
upload this to ODK Aggregate. Remove the period, and my guess is
that it
will start working.Group and field names should begin with an alphabetic character,
only
consist of alphabetic characters, digits and underscores; dashes
are OK, but
may cause trouble in downstream systems (e.g., Javascript
publishers).On Wed, Jul 9, 2014 at 10:03 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
Thanks! Really appreciated!
Sent from my iPhone
On 9 Jul 2014, at 17:12, Yaw Anokwa yan...@nafundi.com wrote:
Rebecca,
This is an issue that Martijn from Enketo is best positioned to
help
with. I've cc'ed him.Yaw
Need ODK services? http://nafundi.com provides form design,
server
setup, professional support, and software development for ODK.On Wed, Jul 9, 2014 at 8:30 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
yes, it can (and has been) uploaded to ODK Aggregate. However
when I
submit
a form online using Enketo, it says that the server is down. I
attach
the
xls and xml equivalent to this ...to see if you can easily see
where
I have
gone wrong.Becky
On Tue, Jul 8, 2014 at 8:24 PM, Mitch Sundt < mitche...@gmail.com> wrote:
If the form can be uploaded to ODK Aggregate, you should be
able to
submit
completed forms to it.Note that the form has to be uploaded to ODK Aggregate before
you
can
submit to it.On Tue, Jul 8, 2014 at 9:44 AM, Rebecca Stedham < rlst...@gmail.com> wrote:
Unfortunately I have just run out of quota and cannot logon
and
browse to
it....however this has only just happened.It is strange - I have been able to submit completed forms
for the
sample
xls form that ODK provides...but not for the one that I have
created...even
though the one I have created in excel can be converted to
xml
using
xlsform...and can be viewed and completed in enketo. So it
must be
something
wrong with my form I suspect? ...although I cannot find
anything
wrong.Thank you so much for responding to me. Very much
appreciated.Becky
On Tue, Jul 8, 2014 at 5:34 PM, Mitch Sundt < mitche...@gmail.com> wrote:
Can you browse to your ODK Aggregate and log onto it?
(i.e., are
you
out of quota?)I assume you set up your authentication credentials per:
https://accounts.enketo.org/support/aggregate/On Tue, Jul 8, 2014 at 5:33 AM, rlst...@gmail.com wrote:
Hi guys.
I am consistently getting the error: 'Sorry, the data
server for
your
form or the Enketo server is down. Please try again later
or
contact
sup...@enketo.org please'I am using ODK aggregate server ...could anyone point me
in the
right
direction for working through this?Becky
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails
from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout
.--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a
topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an
to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails
from it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a
topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visithttps://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an
email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from
it,
send an
email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic
in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an
email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.comOptions: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send
an email to opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in
the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/UBIyAJNL8Z4/
unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.For more options, visit https://groups.google.com/d/optout.
--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an
email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/opendatakit/UBIyAJNL8Z4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
--
Did you know that Enketo Smart Paper has now become the #1 tool for data
collection? Don't fall behind. Use it!
Enketo https://enketo.org | LinkedIn
http://www.linkedin.com/company/enketo-llc | GitHub
https://github.com/MartijnR | Twitter https://twitter.com/enketo
The latest version of Enketo (on enketo.org) will now avoid this issue for
new records.
If anybody has records stuck in the queue that won't (ever) submit to ODK
Aggregate, please send me the XForm or XLSForm and the exported file (click
on the Export button in the sidebar of the Enketo webform). After
confirming the issue, I'll work with you to get those records submitted.
P.S. this particular issue can occur when a calculation is added to an
input field with type=int or type=decimal or if XLSForm was not used to
create the form.
Cheers,
Martijn