Group and cascade selection

I have multiple questions on one screen

Question 1 has select_one option

Question 2 has select_one option - list populated based on Q1 above.

Question 3 has select_one option - list populated based on Q2 above.

Currently, I have to swipe screen forward and back to see the list in Q2 & Q3.

Is there a way to refresh the screen when a choice is picked using auto-refresh? The survey is long and ideally would like to present enumerators with multiple questions in one screen.

Any help is greatly appreciated.

Thanks
Pramod.

No. This is a limitation in ODK Collect. If you have one question that is
dependent upon the value of another, like these select_one statements, they
need to be on separate screens.

··· On Tue, Jul 30, 2013 at 6:24 AM, wrote:

I have multiple questions on one screen

Question 1 has select_one option

Question 2 has select_one option - list populated based on Q1 above.

Question 3 has select_one option - list populated based on Q2 above.

Currently, I have to swipe screen forward and back to see the list in Q2 &
Q3.

Is there a way to refresh the screen when a choice is picked using
auto-refresh? The survey is long and ideally would like to present
enumerators with multiple questions in one screen.

Any help is greatly appreciated.

Thanks
Pramod.

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

Thank you for your response.

Pramod.

··· On Tuesday, July 30, 2013 12:38:54 PM UTC-4, Mitch Sundt wrote: > No. This is a limitation in ODK Collect. If you have one question that is dependent upon the value of another, like these select_one statements, they need to be on separate screens. > > > On Tue, Jul 30, 2013 at 6:24 AM, wrote: > > I have multiple questions on one screen > > > > Question 1 has select_one option > > > > Question 2 has select_one option - list populated based on Q1 above. > > > > Question 3 has select_one option - list populated based on Q2 above. > > > > Currently, I have to swipe screen forward and back to see the list in Q2 & Q3. > > > > Is there a way to refresh the screen when a choice is picked using auto-refresh? The survey is long and ideally would like to present enumerators with multiple questions in one screen. > > > > Any help is greatly appreciated. > > > > Thanks > > Pramod. > > > > -- > > -- > > Post: opend...@googlegroups.com > > Unsubscribe: opendatakit...@googlegroups.com > > Options: http://groups.google.com/group/opendatakit?hl=en > > > > --- > > You received this message because you are subscribed to the Google Groups "ODK Community" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com. > > For more options, visit https://groups.google.com/groups/opt_out. > > > > > > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com

Thank you for your response.

Pramod.

No. This is a limitation in ODK Collect. If you have one question that is dependent upon the value of another, like these select_one statements, they need to be on separate screens.

I have multiple questions on one screen

Question 1 has select_one option

Question 2 has select_one option - list populated based on Q1 above.

Question 3 has select_one option - list populated based on Q2 above.

Currently, I have to swipe screen forward and back to see the list in Q2 & Q3.

Is there a way to refresh the screen when a choice is picked using auto-refresh? The survey is long and ideally would like to present enumerators with multiple questions in one screen.

Any help is greatly appreciated.

Thanks

Pramod.

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Dear Mitch,

Is there any ways to do it, right now? I hope you can response this question, because i want my survey to be on one screen and the question is relevant with each other.

Regards,

··· On Wednesday, July 31, 2013 12:25:56 AM UTC+7, pmudd...@poverty-action.org wrote: > On Tuesday, July 30, 2013 12:38:54 PM UTC-4, Mitch Sundt wrote: > > On Tue, Jul 30, 2013 at 6:24 AM, wrote:

Bunhann,

No. It's still a limitation. ODK Survey might make some of these use
cases easier.

Yaw

··· -- Need ODK services? http://nafundi.com provides form design, server setup, professional support, and software development for ODK.

On Wed, May 7, 2014 at 10:00 PM, bunhann@gmail.com wrote:

On Wednesday, July 31, 2013 12:25:56 AM UTC+7, pmudd...@poverty-action.org wrote:

Thank you for your response.

Pramod.
On Tuesday, July 30, 2013 12:38:54 PM UTC-4, Mitch Sundt wrote:

No. This is a limitation in ODK Collect. If you have one question that is dependent upon the value of another, like these select_one statements, they need to be on separate screens.

On Tue, Jul 30, 2013 at 6:24 AM, pmudd...@poverty-action.org wrote:

I have multiple questions on one screen

Question 1 has select_one option

Question 2 has select_one option - list populated based on Q1 above.

Question 3 has select_one option - list populated based on Q2 above.

Currently, I have to swipe screen forward and back to see the list in Q2 & Q3.

Is there a way to refresh the screen when a choice is picked using auto-refresh? The survey is long and ideally would like to present enumerators with multiple questions in one screen.

Any help is greatly appreciated.

Thanks

Pramod.

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Dear Mitch,

Is there any ways to do it, right now? I hope you can response this question, because i want my survey to be on one screen and the question is relevant with each other.

Regards,

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Yaw is correct. ODK Survey does support this, but ODK Collect does not.

··· On Thu, May 8, 2014 at 7:42 AM, Yaw Anokwa wrote:

Bunhann,

No. It's still a limitation. ODK Survey might make some of these use
cases easier.

Yaw

Need ODK services? http://nafundi.com provides form design, server
setup, professional support, and software development for ODK.

On Wed, May 7, 2014 at 10:00 PM, bunhann@gmail.com wrote:

On Wednesday, July 31, 2013 12:25:56 AM UTC+7, pmudd...@poverty-action.org wrote:

Thank you for your response.

Pramod.
On Tuesday, July 30, 2013 12:38:54 PM UTC-4, Mitch Sundt wrote:

No. This is a limitation in ODK Collect. If you have one question
that is dependent upon the value of another, like these select_one
statements, they need to be on separate screens.

On Tue, Jul 30, 2013 at 6:24 AM, pmudd...@poverty-action.org wrote:

I have multiple questions on one screen

Question 1 has select_one option

Question 2 has select_one option - list populated based on Q1 above.

Question 3 has select_one option - list populated based on Q2 above.

Currently, I have to swipe screen forward and back to see the list in
Q2 & Q3.

Is there a way to refresh the screen when a choice is picked using
auto-refresh? The survey is long and ideally would like to present
enumerators with multiple questions in one screen.

Any help is greatly appreciated.

Thanks

Pramod.

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it,
send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Dear Mitch,

Is there any ways to do it, right now? I hope you can response this
question, because i want my survey to be on one screen and the question is
relevant with each other.

Regards,

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

Yaw is correct. ODK Survey does support this, but ODK Collect does not.

Bunhann,

No. It's still a limitation. ODK Survey might make some of these use

cases easier.

Yaw

--

Need ODK services? http://nafundi.com provides form design, server

setup, professional support, and software development for ODK.

Thank you for your response.

Pramod.

No. This is a limitation in ODK Collect. If you have one question that is dependent upon the value of another, like these select_one statements, they need to be on separate screens.

I have multiple questions on one screen

Question 1 has select_one option

Question 2 has select_one option - list populated based on Q1 above.

Question 3 has select_one option - list populated based on Q2 above.

Currently, I have to swipe screen forward and back to see the list in Q2 & Q3.

Is there a way to refresh the screen when a choice is picked using auto-refresh? The survey is long and ideally would like to present enumerators with multiple questions in one screen.

Any help is greatly appreciated.

Thanks

Pramod.

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--

Mitch Sundt

Software Engineer

University of Washington

mitche...@gmail.com

Dear Mitch,

Is there any ways to do it, right now? I hope you can response this question, because i want my survey to be on one screen and the question is relevant with each other.

Regards,

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Dear Yaw and Mitch,

Thank you for your respond. I think i have to find the way to solve this because I use ODK Collect on tablet, so it is not user interface friendly when i put in the sequence screen.

Regards

··· On Friday, May 9, 2014 12:07:41 AM UTC+7, Mitch Sundt wrote: > On Thu, May 8, 2014 at 7:42 AM, Yaw Anokwa wrote: > On Wed, May 7, 2014 at 10:00 PM, wrote: > > On Wednesday, July 31, 2013 12:25:56 AM UTC+7, pmudd...@poverty-action.org wrote: > >> On Tuesday, July 30, 2013 12:38:54 PM UTC-4, Mitch Sundt wrote: > >> > On Tue, Jul 30, 2013 at 6:24 AM, wrote:

Pramod,

Enketo Smart Paper will allow you to do this if that meets your other
requirements. Hope that helps.

Cheers,
Martijn

··· On Friday, May 9, 2014 2:52:49 AM UTC-6, bun...@gmail.com wrote: > > On Friday, May 9, 2014 12:07:41 AM UTC+7, Mitch Sundt wrote: > > Yaw is correct. ODK Survey does support this, but ODK Collect does not. > > > > > > > > > > On Thu, May 8, 2014 at 7:42 AM, Yaw Anokwa wrote: > > > > Bunhann, > > > > > > > > No. It's still a limitation. ODK Survey might make some of these use > > > > cases easier. > > > > > > > > Yaw > > > > -- > > > > Need ODK services? http://nafundi.com provides form design, server > > > > setup, professional support, and software development for ODK. > > > > > > > > > > > > On Wed, May 7, 2014 at 10:00 PM, wrote: > > > > > On Wednesday, July 31, 2013 12:25:56 AM UTC+7, pmudd...@poverty-action.org wrote: > > > > >> Thank you for your response. > > > > >> > > > > >> Pramod. > > > > >> On Tuesday, July 30, 2013 12:38:54 PM UTC-4, Mitch Sundt wrote: > > > > >> > No. This is a limitation in ODK Collect. If you have one question > that is dependent upon the value of another, like these select_one > statements, they need to be on separate screens. > > > > >> > > > > > >> > > > > > >> > On Tue, Jul 30, 2013 at 6:24 AM, wrote: > > > > >> > > > > > >> > I have multiple questions on one screen > > > > >> > > > > > >> > > > > > >> > > > > > >> > Question 1 has select_one option > > > > >> > > > > > >> > > > > > >> > > > > > >> > Question 2 has select_one option - list populated based on Q1 > above. > > > > >> > > > > > >> > > > > > >> > > > > > >> > Question 3 has select_one option - list populated based on Q2 > above. > > > > >> > > > > > >> > > > > > >> > > > > > >> > Currently, I have to swipe screen forward and back to see the list > in Q2 & Q3. > > > > >> > > > > > >> > > > > > >> > > > > > >> > Is there a way to refresh the screen when a choice is picked using > auto-refresh? The survey is long and ideally would like to present > enumerators with multiple questions in one screen. > > > > >> > > > > > >> > > > > > >> > > > > > >> > Any help is greatly appreciated. > > > > >> > > > > > >> > > > > > >> > > > > > >> > Thanks > > > > >> > > > > > >> > Pramod. > > > > >> > > > > > >> > > > > > >> > > > > > >> > -- > > > > >> > > > > > >> > -- > > > > >> > > > > > >> > Post: opend...@googlegroups.com > > > > >> > > > > > >> > Unsubscribe: opendatakit...@googlegroups.com > > > > >> > > > > > >> > Options: http://groups.google.com/group/opendatakit?hl=en > > > > >> > > > > > >> > > > > > >> > > > > > >> > --- > > > > >> > > > > > >> > You received this message because you are subscribed to the Google > Groups "ODK Community" group. > > > > >> > > > > > >> > To unsubscribe from this group and stop receiving emails from it, > send an email to opendatakit...@googlegroups.com. > > > > >> > > > > > >> > For more options, visit https://groups.google.com/groups/opt_out. > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > -- > > > > >> > Mitch Sundt > > > > >> > Software Engineer > > > > >> > University of Washington > > > > >> > mitche...@gmail.com > > > > > > > > > > Dear Mitch, > > > > > > > > > > Is there any ways to do it, right now? I hope you can response this > question, because i want my survey to be on one screen and the question is > relevant with each other. > > > > > > > > > > Regards, > > > > > > > > > > -- > > > > > -- > > > > > Post: opend...@googlegroups.com > > > > > Unsubscribe: opendatakit...@googlegroups.com > > > > > Options: http://groups.google.com/group/opendatakit?hl=en > > > > > > > > > > --- > > > > > You received this message because you are subscribed to the Google > Groups "ODK Community" group. > > > > > To unsubscribe from this group and stop receiving emails from it, send > an email to opendatakit...@googlegroups.com. > > > > > For more options, visit https://groups.google.com/d/optout. > > > > > > > > -- > > > > -- > > > > Post: opend...@googlegroups.com > > > > Unsubscribe: opendatakit...@googlegroups.com > > > > Options: http://groups.google.com/group/opendatakit?hl=en > > > > > > > > --- > > > > You received this message because you are subscribed to the Google > Groups "ODK Community" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > an email to opendatakit...@googlegroups.com. > > > > For more options, visit https://groups.google.com/d/optout. > > > > > > > > > > -- > > Mitch Sundt > > Software Engineer > > University of Washington > > mitche...@gmail.com > > Dear Yaw and Mitch, > > Thank you for your respond. I think i have to find the way to solve this > because I use ODK Collect on tablet, so it is not user interface friendly > when i put in the sequence screen. > > Regards