[ODK Community] ODK aggregate installation not proceeding

Mitch_S · May 20, 2016, 9:05pm

For some reason, if the browser needs to be opened for the first time, or
takes several seconds to start up, the pop-up dialog into which you are
supposed to paste the token string does not render.

To remedy this, please close the "ODK Aggregate App Engine Updater" window,
and re-launch it. The upload tool is within the ODKAggregate folder
produced by the installer. For Windows, double-click the
"ODKAggregateAppEngineUpdater.jar" file. For MacOSX, double-click the
"uploadAggregateToAppEngine.app" file. For Linux, double-click or execute
in a bash window the "uploadAggregateToAppEngine.sh" file.

Proceed as you have done. Provided you still have your browser window open,
when you get the token, a small pop-up window should now display, into
which the token string can be pasted.

···

On Fri, May 20, 2016 at 12:10 PM, wrote:

Hi,

I am installing ODK Aggregate using the available information/guidelines
on the web. Once I complete installation I am shifted on to "ODK aggregate
App Engine Updater" window where I entered my Gmail account through which I
am using google's cloud platform. After entering my account and clicking
"Upload ODK Aggregate", I am provided with a code which I pasted back in
the ODK Aggregate App Engine Updater's output window.

After pasting code the installation gets stuck does not proceed. Could
anyone guide on how to solve this problem and complete installation?

Thanks,
Abbas

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

essy_mo · September 5, 2016, 3:31pm

For some reason, if the browser needs to be opened for the first time, or takes several seconds to start up, the pop-up dialog into which you are supposed to paste the token string does not render.

To remedy this, please close the "ODK Aggregate App Engine Updater" window, and re-launch it. The upload tool is within the ODKAggregate folder produced by the installer. For Windows, double-click the "ODKAggregateAppEngineUpdater.jar" file. For MacOSX, double-click the "uploadAggregateToAppEngine.app" file. For Linux, double-click or execute in a bash window the "uploadAggregateToAppEngine.sh" file.

Proceed as you have done. Provided you still have your browser window open, when you get the token, a small pop-up window should now display, into which the token string can be pasted.

Hi,

I am installing ODK Aggregate using the available information/guidelines on the web. Once I complete installation I am shifted on to "ODK aggregate App Engine Updater" window where I entered my Gmail account through which I am using google's cloud platform. After entering my account and clicking "Upload ODK Aggregate", I am provided with a code which I pasted back in the ODK Aggregate App Engine Updater's output window.

After pasting code the installation gets stuck does not proceed. Could anyone guide on how to solve this problem and complete installation?

Thanks,
Abbas

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hello @mitch,
I have an error after I copy and paste the code from 'get token',kindly assist.Thank you

getToken : 403 Forbidden
getToken : You do not have permission to modify this app (app_id=u's~motion-pictures').
getToken :
getToken!: You do not have permission to modify this app (app_id=u's~motion-pictures').
getToken!: This is try #3
getToken : Please see the logs [/tmp/appcfg1625673990974710084.log] for further information.
getToken :
getToken!:
status : Action failed or aborted by user

···

On Saturday, 21 May 2016 00:05:52 UTC+3, Mitch Sundt wrote: > On Fri, May 20, 2016 at 12:10 PM, wrote:

essy_mo · September 5, 2016, 3:42pm

Hello @Mitch,
I have an error when I copy and paste the code to the pop up window,the
error looks like this:

getToken : 403 Forbidden
getToken : You do not have permission to modify this app
(app_id=u's~motion-pictures').
getToken :
getToken!: You do not have permission to modify this app
(app_id=u's~motion-pictures').
getToken!: This is try #3
getToken : Please see the logs [/tmp/appcfg1625673990974710084.log] for
further information.
getToken :
getToken!:
status : Action failed or aborted by user

Kindly assist.Thank you

···

On Saturday, 21 May 2016 00:05:52 UTC+3, Mitch Sundt wrote: > > For some reason, if the browser needs to be opened for the first time, or > takes several seconds to start up, the pop-up dialog into which you are > supposed to paste the token string does not render. > > To remedy this, please close the "ODK Aggregate App Engine Updater" > window, and re-launch it. The upload tool is within the ODKAggregate folder > produced by the installer. For Windows, double-click the > "ODKAggregateAppEngineUpdater.jar" file. For MacOSX, double-click the > "uploadAggregateToAppEngine.app" file. For Linux, double-click or execute > in a bash window the "uploadAggregateToAppEngine.sh" file. > > Proceed as you have done. Provided you still have your browser window > open, when you get the token, a small pop-up window should now display, > into which the token string can be pasted. > > > On Fri, May 20, 2016 at 12:10 PM, <abba...@gmail.com > wrote: > >> Hi, >> >> I am installing ODK Aggregate using the available information/guidelines >> on the web. Once I complete installation I am shifted on to "ODK aggregate >> App Engine Updater" window where I entered my Gmail account through which I >> am using google's cloud platform. After entering my account and clicking >> "Upload ODK Aggregate", I am provided with a code which I pasted back in >> the ODK Aggregate App Engine Updater's output window. >> >> After pasting code the installation gets stuck does not proceed. Could >> anyone guide on how to solve this problem and complete installation? >> >> Thanks, >> Abbas >> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com >

yanokwa · September 8, 2016, 1:06pm

It sounds like the Google account you entered does not have
permissions to manage and upload changes to the AppEngine instance.

Verify that you can access the Cloud Platform console for the server.
If you have multiple Gmail accounts, sign out of all of them, and only
sign into this one account, then visit the Cloud Platform console.

Yaw

···

On Mon, Sep 5, 2016 at 3:31 PM, wrote: > On Saturday, 21 May 2016 00:05:52 UTC+3, Mitch Sundt wrote: >> For some reason, if the browser needs to be opened for the first time, or takes several seconds to start up, the pop-up dialog into which you are supposed to paste the token string does not render. >> >> >> To remedy this, please close the "ODK Aggregate App Engine Updater" window, and re-launch it. The upload tool is within the ODKAggregate folder produced by the installer. For Windows, double-click the "ODKAggregateAppEngineUpdater.jar" file. For MacOSX, double-click the "uploadAggregateToAppEngine.app" file. For Linux, double-click or execute in a bash window the "uploadAggregateToAppEngine.sh" file. >> >> >> Proceed as you have done. Provided you still have your browser window open, when you get the token, a small pop-up window should now display, into which the token string can be pasted. >> >> >> >> >> On Fri, May 20, 2016 at 12:10 PM, wrote: >> >> Hi, >> >> >> I am installing ODK Aggregate using the available information/guidelines on the web. Once I complete installation I am shifted on to "ODK aggregate App Engine Updater" window where I entered my Gmail account through which I am using google's cloud platform. After entering my account and clicking "Upload ODK Aggregate", I am provided with a code which I pasted back in the ODK Aggregate App Engine Updater's output window. >> >> >> After pasting code the installation gets stuck does not proceed. Could anyone guide on how to solve this problem and complete installation? >> >> >> Thanks, >> Abbas >> >> >> >> >> -- >> >> -- >> >> Post: opend...@googlegroups.com >> >> Unsubscribe: opendatakit...@googlegroups.com >> >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> >> >> --- >> >> You received this message because you are subscribed to the Google Groups "ODK Community" group. >> >> To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com. >> >> For more options, visit https://groups.google.com/d/optout. >> >> >> >> >> >> -- >> >> Mitch Sundt >> Software Engineer >> University of Washington >> mitche...@gmail.com > > Hello @mitch, > I have an error after I copy and paste the code from 'get token',kindly assist.Thank you > > getToken : 403 Forbidden > getToken : You do not have permission to modify this app (app_id=u's~motion-pictures'). > getToken : > getToken!: You do not have permission to modify this app (app_id=u's~motion-pictures'). > getToken!: This is try #3 > getToken : Please see the logs [/tmp/appcfg1625673990974710084.log] for further information. > getToken : > getToken!: > status : Action failed or aborted by user > > -- > -- > Post: opendatakit@googlegroups.com > Unsubscribe: opendatakit+unsubscribe@googlegroups.com > Options: http://groups.google.com/group/opendatakit?hl=en > > --- > You received this message because you are subscribed to the Google Groups "ODK Community" group. > To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.

Mitch_S · September 12, 2016, 6:43pm

I just updated the documentation (step 11
https://opendatakit.org/use/aggregate/#Installing_an_App_Engine_Instance --
you might need to reload this page to get the change):

"It is likely that you have several different gmail accounts and Google has
gotten confused during the token-issuing process. In this case, when the
browser window opens, before selecting an account, copy the URL, open a
Private Browsing or Incognito Window in your browser, and past the URL into
that. Then proceed to get the token, etc. This should fix this issue."

···

On Thu, Sep 8, 2016 at 6:06 AM, Yaw Anokwa wrote:

It sounds like the Google account you entered does not have
permissions to manage and upload changes to the AppEngine instance.

Verify that you can access the Cloud Platform console for the server.
If you have multiple Gmail accounts, sign out of all of them, and only
sign into this one account, then visit the Cloud Platform console.

Yaw

On Mon, Sep 5, 2016 at 3:31 PM, esthermonchari@gmail.com wrote:

On Saturday, 21 May 2016 00:05:52 UTC+3, Mitch Sundt wrote:

For some reason, if the browser needs to be opened for the first time,
or takes several seconds to start up, the pop-up dialog into which you are
supposed to paste the token string does not render.

To remedy this, please close the "ODK Aggregate App Engine Updater"
window, and re-launch it. The upload tool is within the ODKAggregate folder
produced by the installer. For Windows, double-click the
"ODKAggregateAppEngineUpdater.jar" file. For MacOSX, double-click the
"uploadAggregateToAppEngine.app" file. For Linux, double-click or execute
in a bash window the "uploadAggregateToAppEngine.sh" file.

Proceed as you have done. Provided you still have your browser window
open, when you get the token, a small pop-up window should now display,
into which the token string can be pasted.

On Fri, May 20, 2016 at 12:10 PM, abba...@gmail.com wrote:

Hi,

I am installing ODK Aggregate using the available
information/guidelines on the web. Once I complete installation I am
shifted on to "ODK aggregate App Engine Updater" window where I entered my
Gmail account through which I am using google's cloud platform. After
entering my account and clicking "Upload ODK Aggregate", I am provided with
a code which I pasted back in the ODK Aggregate App Engine Updater's output
window.

After pasting code the installation gets stuck does not proceed. Could
anyone guide on how to solve this problem and complete installation?

Thanks,
Abbas

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hello @mitch,
I have an error after I copy and paste the code from 'get token',kindly
assist.Thank you

getToken : 403 Forbidden
getToken : You do not have permission to modify this app
(app_id=u's~motion-pictures').
getToken :
getToken!: You do not have permission to modify this app
(app_id=u's~motion-pictures').
getToken!: This is try #3
getToken : Please see the logs [/tmp/appcfg1625673990974710084.log]
for further information.
getToken :
getToken!:
status : Action failed or aborted by user

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com