Problem loading ODK Aggregate page

Support
1

Hi all,
After successfully testing ODK Aggregate, I am now encountering a server
problem, using the same version of ODK (1.2) and the same form(s). When I
try to login to my naxosarch.appspot.com instance, the server goes into a
loop, starting here:
https://naxosarch.appspot.com/Aggregate.html

and then trying to load this:
https://naxosarch.appspot.com/Aggregate.html#submissions/filter///

Neither fully loads, and it just cycles between them, giving me no ability
to act at all. Trying to upload forms from a tablet also produces an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have any
suggestions?

Thanks,

Dan

2

Invite me as a developer (
http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) and I
can fix this issue.

Note that version 1.2 is very old. You should consider upgrading (upgrading
won't fix this issue).

See http://code.google.com/p/opendatakit/wiki/AggregateReleaseNotes for
upgrade steps.

Note that with recent changes in BigTables storage, you may begin to see
failures during the publishing or retrieving of data.

Mitch

··· On Tue, Aug 20, 2013 at 11:32 PM, dcontre wrote:

Hi all,
After successfully testing ODK Aggregate, I am now encountering a server
problem, using the same version of ODK (1.2) and the same form(s). When I
try to login to my naxosarch.appspot.com instance, the server goes into a
loop, starting here:
https://naxosarch.appspot.com/Aggregate.html

and then trying to load this:
https://naxosarch.appspot.com/Aggregate.html#submissions/filter///

Neither fully loads, and it just cycles between them, giving me no ability
to act at all. Trying to upload forms from a tablet also produces an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have any
suggestions?

Thanks,

Dan

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

3

Great - thanks for your quick reply. I've invited you as a developer. Is
this problem the result of a mistake on my part, and something that I can
avoid in future? Or simply an inevitable glitch?

Thanks,

Dan

··· On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote: > > Invite me as a developer ( > http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) and > I can fix this issue. > > Note that version 1.2 is very old. You should consider upgrading > (upgrading won't fix this issue). > > See http://code.google.com/p/opendatakit/wiki/AggregateReleaseNotes for > upgrade steps. > > Note that with recent changes in BigTables storage, you may begin to see > failures during the publishing or retrieving of data. > > Mitch > > > On Tue, Aug 20, 2013 at 11:32 PM, dcontre <fuzzy.c...@gmail.com wrote: > >> Hi all, >> After successfully testing ODK Aggregate, I am now encountering a server >> problem, using the same version of ODK (1.2) and the same form(s). When I >> try to login to my naxosarch.appspot.com instance, the server goes into >> a loop, starting here: >> https://naxosarch.appspot.com/Aggregate.html >> >> and then trying to load this: >> https://naxosarch.appspot.com/Aggregate.html#submissions/filter/// >> >> Neither fully loads, and it just cycles between them, giving me no >> ability to act at all. Trying to upload forms from a tablet also produces >> an error. >> >> I'm at a bit of a loss. Has anyone experienced this, and/or have any >> suggestions? >> >> Thanks, >> >> Dan >> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/groups/opt_out. >> > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com >
4

Hi Dan,

It should be working again.

The problem was with the MOPE_v1 form definition.

The database ended up with two entries for it when there should only be one
entry. This is a known issue. An initial fix was done in 1.2, and further
fixes have been done in the 1.3.x release. However, the problem still
occurs from time to time.

The earlier issues were due to rapidly clicking the Add-form button,
causing two uploads to be processed within 1-2 seconds of each other. We
seem to have fixed that issue.

The newest issues seem to be related to the 15-minute grace period for
changed forms. In your case, you uploaded the form once at 11:11:06, and
again at 11:12:17 (70 seconds later). For some reason, the second upload
did not detect and update the record at 11:11:06, but instead created a
second record.

The low frequency of this issue (~1 every 3 weeks) and the fact that it
occurs during revisions to the forms, and not during data upload, has
placed in on the 'nice to fix' list -- we are not actively investigating it.

Mitch

··· On Wed, Aug 21, 2013 at 1:32 PM, dcontre wrote:

Great - thanks for your quick reply. I've invited you as a developer. Is
this problem the result of a mistake on my part, and something that I can
avoid in future? Or simply an inevitable glitch?

Thanks,

Dan

On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote:

Invite me as a developer ( http://code.google.com/p/**opendatakit/wiki/**
AppEngineTroubleshootinghttp://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting) and I can fix this issue.

Note that version 1.2 is very old. You should consider upgrading
(upgrading won't fix this issue).

See http://code.google.com/p/**opendatakit/wiki/**AggregateReleaseNoteshttp://code.google.com/p/opendatakit/wiki/AggregateReleaseNotesfor upgrade steps.

Note that with recent changes in BigTables storage, you may begin to see
failures during the publishing or retrieving of data.

Mitch

On Tue, Aug 20, 2013 at 11:32 PM, dcontre fuzzy.c...@gmail.com wrote:

Hi all,
After successfully testing ODK Aggregate, I am now encountering a server
problem, using the same version of ODK (1.2) and the same form(s). When I
try to login to my naxosarch.appspot.com instance, the server goes into
a loop, starting here:
https://naxosarch.appspot.com/**Aggregate.htmlhttps://naxosarch.appspot.com/Aggregate.html

and then trying to load this:
https://naxosarch.appspot.com/**Aggregate.html#submissions/**filter///https://naxosarch.appspot.com/Aggregate.html#submissions/filter///

Neither fully loads, and it just cycles between them, giving me no
ability to act at all. Trying to upload forms from a tablet also produces
an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have any
suggestions?

Thanks,

Dan

--

Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@**googlegroups.com

Options: http://groups.google.com/**group/opendatakit?hl=enhttp://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@**googlegroups.com.

For more options, visit https://groups.google.com/**groups/opt_outhttps://groups.google.com/groups/opt_out
.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

5

Great; many thanks for both the fix and the explanation. Seems like a
reasonably avoidable problem - it arose to begin with from trying to make
iterative improvements to the form. I thought that I had been consistently
deleting previous instances, but will be more careful about that in future,
and perhaps allow a certain lag between uploads.

Much appreciated,

Dan

··· On Thu, Aug 22, 2013 at 7:39 PM, Mitch Sundt wrote:

Hi Dan,

It should be working again.

The problem was with the MOPE_v1 form definition.

The database ended up with two entries for it when there should only be
one entry. This is a known issue. An initial fix was done in 1.2, and
further fixes have been done in the 1.3.x release. However, the problem
still occurs from time to time.

The earlier issues were due to rapidly clicking the Add-form button,
causing two uploads to be processed within 1-2 seconds of each other. We
seem to have fixed that issue.

The newest issues seem to be related to the 15-minute grace period for
changed forms. In your case, you uploaded the form once at 11:11:06, and
again at 11:12:17 (70 seconds later). For some reason, the second upload
did not detect and update the record at 11:11:06, but instead created a
second record.

The low frequency of this issue (~1 every 3 weeks) and the fact that it
occurs during revisions to the forms, and not during data upload, has
placed in on the 'nice to fix' list -- we are not actively investigating it.

Mitch

On Wed, Aug 21, 2013 at 1:32 PM, dcontre fuzzy.contreras@gmail.comwrote:

Great - thanks for your quick reply. I've invited you as a developer.
Is this problem the result of a mistake on my part, and something that I
can avoid in future? Or simply an inevitable glitch?

Thanks,

Dan

On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote:

Invite me as a developer ( http://code.google.com/p/**opendatakit/wiki/*
*AppEngineTroubleshootinghttp://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting) and I can fix this issue.

Note that version 1.2 is very old. You should consider upgrading
(upgrading won't fix this issue).

See http://code.google.com/p/**opendatakit/wiki/**AggregateReleaseNoteshttp://code.google.com/p/opendatakit/wiki/AggregateReleaseNotesfor upgrade steps.

Note that with recent changes in BigTables storage, you may begin to see
failures during the publishing or retrieving of data.

Mitch

On Tue, Aug 20, 2013 at 11:32 PM, dcontre fuzzy.c...@gmail.com wrote:

Hi all,
After successfully testing ODK Aggregate, I am now encountering a
server problem, using the same version of ODK (1.2) and the same form(s).
When I try to login to my naxosarch.appspot.com instance, the server
goes into a loop, starting here:
https://naxosarch.appspot.com/**Aggregate.htmlhttps://naxosarch.appspot.com/Aggregate.html

and then trying to load this:
https://naxosarch.appspot.com/**Aggregate.html#submissions/**filter///https://naxosarch.appspot.com/Aggregate.html#submissions/filter///

Neither fully loads, and it just cycles between them, giving me no
ability to act at all. Trying to upload forms from a tablet also produces
an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have any
suggestions?

Thanks,

Dan

--

Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@**googlegroups.com

Options: http://groups.google.com/**group/opendatakit?hl=enhttp://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@**googlegroups.com.

For more options, visit https://groups.google.com/**groups/opt_outhttps://groups.google.com/groups/opt_out
.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to a topic in the
Google Groups "ODK Community" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/opendatakit/dKAqdtqZBEM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

6

Hi Dan,

It should be working again.

The problem was with the MOPE_v1 form definition.

The database ended up with two entries for it when there should only be one entry. This is a known issue. An initial fix was done in 1.2, and further fixes have been done in the 1.3.x release. However, the problem still occurs from time to time.

The earlier issues were due to rapidly clicking the Add-form button, causing two uploads to be processed within 1-2 seconds of each other. We seem to have fixed that issue.

The newest issues seem to be related to the 15-minute grace period for changed forms. In your case, you uploaded the form once at 11:11:06, and again at 11:12:17 (70 seconds later). For some reason, the second upload did not detect and update the record at 11:11:06, but instead created a second record.

The low frequency of this issue (~1 every 3 weeks) and the fact that it occurs during revisions to the forms, and not during data upload, has placed in on the 'nice to fix' list -- we are not actively investigating it.

Mitch

Great - thanks for your quick reply. I've invited you as a developer. Is this problem the result of a mistake on my part, and something that I can avoid in future? Or simply an inevitable glitch?

Thanks,

Dan

Invite me as a developer ( http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) and I can fix this issue.

Note that version 1.2 is very old. You should consider upgrading (upgrading won't fix this issue).

See http://code.google.com/p/opendatakit/wiki/AggregateReleaseNotes for upgrade steps.

Note that with recent changes in BigTables storage, you may begin to see failures during the publishing or retrieving of data.

Mitch

Hi all,
After successfully testing ODK Aggregate, I am now encountering a server problem, using the same version of ODK (1.2) and the same form(s). When I try to login to my naxosarch.appspot.com instance, the server goes into a loop, starting here:

https://naxosarch.appspot.com/Aggregate.html

and then trying to load this:
https://naxosarch.appspot.com/Aggregate.html#submissions/filter///

Neither fully loads, and it just cycles between them, giving me no ability to act at all. Trying to upload forms from a tablet also produces an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have any suggestions?

Thanks,

Dan

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hi Mitch,
I am having the same problem, how do I go about correcting it?
Sincerely,
Sam

··· On Thursday, August 22, 2013 7:39:52 PM UTC+2, Mitch Sundt wrote: > On Wed, Aug 21, 2013 at 1:32 PM, dcontre wrote: > On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote: > On Tue, Aug 20, 2013 at 11:32 PM, dcontre wrote:
7

If you don't want to give me developer access (
http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting )

Then see the section (just added) on that wiki that detail the steps to go
through to repair your database yourself.

Mitch

··· On Tue, Jan 28, 2014 at 7:15 AM, wrote:

On Thursday, August 22, 2013 7:39:52 PM UTC+2, Mitch Sundt wrote:

Hi Dan,

It should be working again.

The problem was with the MOPE_v1 form definition.

The database ended up with two entries for it when there should only be
one entry. This is a known issue. An initial fix was done in 1.2, and
further fixes have been done in the 1.3.x release. However, the problem
still occurs from time to time.

The earlier issues were due to rapidly clicking the Add-form button,
causing two uploads to be processed within 1-2 seconds of each other. We
seem to have fixed that issue.

The newest issues seem to be related to the 15-minute grace period for
changed forms. In your case, you uploaded the form once at 11:11:06, and
again at 11:12:17 (70 seconds later). For some reason, the second upload
did not detect and update the record at 11:11:06, but instead created a
second record.

The low frequency of this issue (~1 every 3 weeks) and the fact that it
occurs during revisions to the forms, and not during data upload, has
placed in on the 'nice to fix' list -- we are not actively investigating it.

Mitch

On Wed, Aug 21, 2013 at 1:32 PM, dcontre fuzzy.c...@gmail.com wrote:

Great - thanks for your quick reply. I've invited you as a developer.
Is this problem the result of a mistake on my part, and something that I
can avoid in future? Or simply an inevitable glitch?

Thanks,

Dan

On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote:

Invite me as a developer (
http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) and
I can fix this issue.

Note that version 1.2 is very old. You should consider upgrading
(upgrading won't fix this issue).

See http://code.google.com/p/opendatakit/wiki/AggregateReleaseNotes for
upgrade steps.

Note that with recent changes in BigTables storage, you may begin to see
failures during the publishing or retrieving of data.

Mitch

On Tue, Aug 20, 2013 at 11:32 PM, dcontre fuzzy.c...@gmail.com wrote:

Hi all,
After successfully testing ODK Aggregate, I am now encountering a server
problem, using the same version of ODK (1.2) and the same form(s). When I
try to login to my naxosarch.appspot.com instance, the server goes into a
loop, starting here:

https://naxosarch.appspot.com/Aggregate.html

and then trying to load this:
https://naxosarch.appspot.com/Aggregate.html#submissions/filter///

Neither fully loads, and it just cycles between them, giving me no
ability to act at all. Trying to upload forms from a tablet also produces
an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have any
suggestions?

Thanks,

Dan

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hi Mitch,
I am having the same problem, how do I go about correcting it?
Sincerely,
Sam

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en

You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

8

This link isn't working, I'm also facing the same infinite loop problem
with trying to login. Please let me know how I can fix.

Thanks!

··· On Tuesday, January 28, 2014 at 11:55:26 AM UTC-7, Mitch Sundt wrote: > > If you don't want to give me developer access ( > http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) > > Then see the section (just added) on that wiki that detail the steps to go > through to repair your database yourself. > > Mitch > > > > > On Tue, Jan 28, 2014 at 7:15 AM, <z.sharedv...@gmail.com > wrote: > >> On Thursday, August 22, 2013 7:39:52 PM UTC+2, Mitch Sundt wrote: >> > Hi Dan, >> > >> > It should be working again. >> > >> > The problem was with the MOPE_v1 form definition. >> > >> > The database ended up with two entries for it when there should only be >> one entry. This is a known issue. An initial fix was done in 1.2, and >> further fixes have been done in the 1.3.x release. However, the problem >> still occurs from time to time. >> > >> > >> > >> > The earlier issues were due to rapidly clicking the Add-form button, >> causing two uploads to be processed within 1-2 seconds of each other. We >> seem to have fixed that issue. >> > >> > >> > The newest issues seem to be related to the 15-minute grace period for >> changed forms. In your case, you uploaded the form once at 11:11:06, and >> again at 11:12:17 (70 seconds later). For some reason, the second upload >> did not detect and update the record at 11:11:06, but instead created a >> second record. >> > >> > >> > >> > The low frequency of this issue (~1 every 3 weeks) and the fact that it >> occurs during revisions to the forms, and not during data upload, has >> placed in on the 'nice to fix' list -- we are not actively investigating it. >> > >> > >> > Mitch >> > >> > >> > >> > >> > >> > >> > >> > >> > On Wed, Aug 21, 2013 at 1:32 PM, dcontre wrote: >> > >> > >> > Great - thanks for your quick reply. I've invited you as a developer. >> Is this problem the result of a mistake on my part, and something that I >> can avoid in future? Or simply an inevitable glitch? >> > >> > >> > Thanks, >> > >> > Dan >> > >> > >> > On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote: >> > >> > >> > >> > >> > Invite me as a developer ( >> http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) and >> I can fix this issue. >> > >> > >> > >> > Note that version 1.2 is very old. You should consider upgrading >> (upgrading won't fix this issue). >> > >> > See http://code.google.com/p/opendatakit/wiki/AggregateReleaseNotes >> for upgrade steps. >> > >> > >> > >> > >> > Note that with recent changes in BigTables storage, you may begin to >> see failures during the publishing or retrieving of data. >> > >> > Mitch >> > >> > >> > >> > >> > >> > >> > >> > On Tue, Aug 20, 2013 at 11:32 PM, dcontre wrote: >> > >> > >> > >> > >> > Hi all, >> > After successfully testing ODK Aggregate, I am now encountering a >> server problem, using the same version of ODK (1.2) and the same form(s). >> When I try to login to my naxosarch.appspot.com instance, the server >> goes into a loop, starting here: >> > >> > >> > https://naxosarch.appspot.com/Aggregate.html >> > >> > and then trying to load this: >> > https://naxosarch.appspot.com/Aggregate.html#submissions/filter/// >> > >> > >> > >> > Neither fully loads, and it just cycles between them, giving me no >> ability to act at all. Trying to upload forms from a tablet also produces >> an error. >> > >> > I'm at a bit of a loss. Has anyone experienced this, and/or have any >> suggestions? >> > >> > >> > >> > Thanks, >> > >> > Dan >> > >> > >> > >> > >> > >> > -- >> > >> > -- >> > >> > Post: opend...@googlegroups.com >> > >> > Unsubscribe: opendatakit...@googlegroups.com >> > >> > >> > Options: http://groups.google.com/group/opendatakit?hl=en >> > >> > >> > >> > --- >> > >> > You received this message because you are subscribed to the Google >> Groups "ODK Community" group. >> > >> > To unsubscribe from this group and stop receiving emails from it, send >> an email to opendatakit...@googlegroups.com. >> > >> > >> > For more options, visit https://groups.google.com/groups/opt_out. >> > >> > >> > >> > >> > >> > -- >> > Mitch Sundt >> > Software Engineer >> > University of Washington >> > mitche...@gmail.com >> > >> > >> > >> > >> > >> > >> > >> > >> > -- >> > >> > -- >> > >> > Post: opend...@googlegroups.com >> > >> > Unsubscribe: opendatakit...@googlegroups.com >> > >> > Options: http://groups.google.com/group/opendatakit?hl=en >> > >> > >> > >> > --- >> > >> > You received this message because you are subscribed to the Google >> Groups "ODK Community" group. >> > >> > To unsubscribe from this group and stop receiving emails from it, send >> an email to opendatakit...@googlegroups.com. >> > >> > For more options, visit https://groups.google.com/groups/opt_out. >> > >> > >> > >> > >> > -- >> > Mitch Sundt >> > Software Engineer >> > University of Washington >> > mitche...@gmail.com >> >> Hi Mitch, >> I am having the same problem, how do I go about correcting it? >> Sincerely, >> Sam >> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/groups/opt_out. >> > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com >
9

Hi Trisha,

That link has moved to
https://github.com/opendatakit/opendatakit/wiki/Aggregate-AppEngine-Troubleshooting.

The infinite refresh could be any number of issues, so it might be
best to post a new message with exactly what versions of Aggregate you
are using, on what platform (e.g., Tomcat, App Engine) and what has
changed since this problem started (e.g. have you upgraded).

Thanks,

Yaw

··· On Mon, May 22, 2017 at 10:59 AM, wrote: > This link isn't working, I'm also facing the same infinite loop problem with > trying to login. Please let me know how I can fix. > > Thanks! > > On Tuesday, January 28, 2014 at 11:55:26 AM UTC-7, Mitch Sundt wrote: >> >> If you don't want to give me developer access ( >> http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) >> >> Then see the section (just added) on that wiki that detail the steps to go >> through to repair your database yourself. >> >> Mitch >> >> >> >> >> On Tue, Jan 28, 2014 at 7:15 AM, wrote: >>> >>> On Thursday, August 22, 2013 7:39:52 PM UTC+2, Mitch Sundt wrote: >>> > Hi Dan, >>> > >>> > It should be working again. >>> > >>> > The problem was with the MOPE_v1 form definition. >>> > >>> > The database ended up with two entries for it when there should only be >>> > one entry. This is a known issue. An initial fix was done in 1.2, and >>> > further fixes have been done in the 1.3.x release. However, the problem >>> > still occurs from time to time. >>> > >>> > >>> > >>> > The earlier issues were due to rapidly clicking the Add-form button, >>> > causing two uploads to be processed within 1-2 seconds of each other. We >>> > seem to have fixed that issue. >>> > >>> > >>> > The newest issues seem to be related to the 15-minute grace period for >>> > changed forms. In your case, you uploaded the form once at 11:11:06, and >>> > again at 11:12:17 (70 seconds later). For some reason, the second upload did >>> > not detect and update the record at 11:11:06, but instead created a second >>> > record. >>> > >>> > >>> > >>> > The low frequency of this issue (~1 every 3 weeks) and the fact that it >>> > occurs during revisions to the forms, and not during data upload, has placed >>> > in on the 'nice to fix' list -- we are not actively investigating it. >>> > >>> > >>> > Mitch >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > On Wed, Aug 21, 2013 at 1:32 PM, dcontre wrote: >>> > >>> > >>> > Great - thanks for your quick reply. I've invited you as a developer. >>> > Is this problem the result of a mistake on my part, and something that I can >>> > avoid in future? Or simply an inevitable glitch? >>> > >>> > >>> > Thanks, >>> > >>> > Dan >>> > >>> > >>> > On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote: >>> > >>> > >>> > >>> > >>> > Invite me as a developer ( >>> > http://code.google.com/p/opendatakit/wiki/AppEngineTroubleshooting ) and I >>> > can fix this issue. >>> > >>> > >>> > >>> > Note that version 1.2 is very old. You should consider upgrading >>> > (upgrading won't fix this issue). >>> > >>> > See http://code.google.com/p/opendatakit/wiki/AggregateReleaseNotes for >>> > upgrade steps. >>> > >>> > >>> > >>> > >>> > Note that with recent changes in BigTables storage, you may begin to >>> > see failures during the publishing or retrieving of data. >>> > >>> > Mitch >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > On Tue, Aug 20, 2013 at 11:32 PM, dcontre wrote: >>> > >>> > >>> > >>> > >>> > Hi all, >>> > After successfully testing ODK Aggregate, I am now encountering a >>> > server problem, using the same version of ODK (1.2) and the same form(s). >>> > When I try to login to my naxosarch.appspot.com instance, the server goes >>> > into a loop, starting here: >>> > >>> > >>> > https://naxosarch.appspot.com/Aggregate.html >>> > >>> > and then trying to load this: >>> > https://naxosarch.appspot.com/Aggregate.html#submissions/filter/// >>> > >>> > >>> > >>> > Neither fully loads, and it just cycles between them, giving me no >>> > ability to act at all. Trying to upload forms from a tablet also produces >>> > an error. >>> > >>> > I'm at a bit of a loss. Has anyone experienced this, and/or have any >>> > suggestions? >>> > >>> > >>> > >>> > Thanks, >>> > >>> > Dan >>> > >>> > >>> > >>> > >>> > >>> > -- >>> > >>> > -- >>> > >>> > Post: opend...@googlegroups.com >>> > >>> > Unsubscribe: opendatakit...@googlegroups.com >>> > >>> > >>> > Options: http://groups.google.com/group/opendatakit?hl=en >>> > >>> > >>> > >>> > --- >>> > >>> > You received this message because you are subscribed to the Google >>> > Groups "ODK Community" group. >>> > >>> > To unsubscribe from this group and stop receiving emails from it, send >>> > an email to opendatakit...@googlegroups.com. >>> > >>> > >>> > For more options, visit https://groups.google.com/groups/opt_out. >>> > >>> > >>> > >>> > >>> > >>> > -- >>> > Mitch Sundt >>> > Software Engineer >>> > University of Washington >>> > mitche...@gmail.com >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > -- >>> > >>> > -- >>> > >>> > Post: opend...@googlegroups.com >>> > >>> > Unsubscribe: opendatakit...@googlegroups.com >>> > >>> > Options: http://groups.google.com/group/opendatakit?hl=en >>> > >>> > >>> > >>> > --- >>> > >>> > You received this message because you are subscribed to the Google >>> > Groups "ODK Community" group. >>> > >>> > To unsubscribe from this group and stop receiving emails from it, send >>> > an email to opendatakit...@googlegroups.com. >>> > >>> > For more options, visit https://groups.google.com/groups/opt_out. >>> > >>> > >>> > >>> > >>> > -- >>> > Mitch Sundt >>> > Software Engineer >>> > University of Washington >>> > mitche...@gmail.com >>> >>> Hi Mitch, >>> I am having the same problem, how do I go about correcting it? >>> Sincerely, >>> Sam >>> >>> -- >>> -- >>> Post: opend...@googlegroups.com >>> Unsubscribe: opendatakit...@googlegroups.com >>> Options: http://groups.google.com/group/opendatakit?hl=en >>> >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "ODK Community" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to opendatakit...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> >> >> -- >> Mitch Sundt >> Software Engineer >> University of Washington >> mitche...@gmail.com > > -- > -- > Post: opendatakit@googlegroups.com > Unsubscribe: opendatakit+unsubscribe@googlegroups.com > Options: http://groups.google.com/group/opendatakit?hl=en > > --- > You received this message because you are subscribed to the Google Groups > "ODK Community" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to opendatakit+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.
10

Thanks Yaw, I was finally able to log in.

~Trisha

···

-----Original Message-----
From: opendatakit@googlegroups.com [mailto:opendatakit@googlegroups.com] On Behalf Of Yaw Anokwa
Sent: Thursday, May 25, 2017 9:03 AM
To: ODK Community opendatakit@googlegroups.com
Subject: Re: [ODK Community] problem loading ODK Aggregate page

Hi Trisha,

That link has moved to
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_opendatakit_opendatakit_wiki_Aggregate-2DAppEngine-2DTroubleshooting&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=-m6CFsOVxCFHn4orLknfyyIxryWJpfsjXdKXa1XVqpc&e= .

The infinite refresh could be any number of issues, so it might be best to post a new message with exactly what versions of Aggregate you are using, on what platform (e.g., Tomcat, App Engine) and what has changed since this problem started (e.g. have you upgraded).

Thanks,

Yaw

On Mon, May 22, 2017 at 10:59 AM, Trisha.Gourley@rescue.org wrote:

This link isn't working, I'm also facing the same infinite loop
problem with trying to login. Please let me know how I can fix.

Thanks!

On Tuesday, January 28, 2014 at 11:55:26 AM UTC-7, Mitch Sundt wrote:

If you don't want to give me developer access (
https://urldefense.proofpoint.com/v2/url?u=http-3A__code.google.com_p
_opendatakit_wiki_AppEngineTroubleshooting&d=DwIBaQ&c=0u3nQZwm2He4Oda
qbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGR
cCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=CPbqwdPfSXnEoQ3qcIhEyOuH8F9Glle5f-8v
85dfp8M&e= )

Then see the section (just added) on that wiki that detail the steps
to go through to repair your database yourself.

Mitch

On Tue, Jan 28, 2014 at 7:15 AM, z.sharedv...@gmail.com wrote:

On Thursday, August 22, 2013 7:39:52 PM UTC+2, Mitch Sundt wrote:

Hi Dan,

It should be working again.

The problem was with the MOPE_v1 form definition.

The database ended up with two entries for it when there should
only be one entry. This is a known issue. An initial fix was done
in 1.2, and further fixes have been done in the 1.3.x release.
However, the problem still occurs from time to time.

The earlier issues were due to rapidly clicking the Add-form
button, causing two uploads to be processed within 1-2 seconds of
each other. We seem to have fixed that issue.

The newest issues seem to be related to the 15-minute grace period
for changed forms. In your case, you uploaded the form once at
11:11:06, and again at 11:12:17 (70 seconds later). For some
reason, the second upload did not detect and update the record at
11:11:06, but instead created a second record.

The low frequency of this issue (~1 every 3 weeks) and the fact
that it occurs during revisions to the forms, and not during data
upload, has placed in on the 'nice to fix' list -- we are not actively investigating it.

Mitch

On Wed, Aug 21, 2013 at 1:32 PM, dcontre fuzzy.c...@gmail.com wrote:

Great - thanks for your quick reply. I've invited you as a developer.
Is this problem the result of a mistake on my part, and something
that I can avoid in future? Or simply an inevitable glitch?

Thanks,

Dan

On Wednesday, August 21, 2013 7:35:09 PM UTC+2, Mitch Sundt wrote:

Invite me as a developer (
https://urldefense.proofpoint.com/v2/url?u=http-3A__code.google.co
m_p_opendatakit_wiki_AppEngineTroubleshooting&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=CPbqwdPfSXnEoQ3qcIhEyOuH8F9Glle5f-8v85dfp8M&e= ) and I can fix this issue.

Note that version 1.2 is very old. You should consider upgrading
(upgrading won't fix this issue).

See
https://urldefense.proofpoint.com/v2/url?u=http-3A__code.google.com_p_opendatakit_wiki_AggregateReleaseNotes&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=inscihFPJ-U5ZG7tBVQk6YgLKebEdW2dbyB2QA2_63Y&e= for upgrade steps.

Note that with recent changes in BigTables storage, you may begin
to see failures during the publishing or retrieving of data.

Mitch

On Tue, Aug 20, 2013 at 11:32 PM, dcontre fuzzy.c...@gmail.com wrote:

Hi all,
After successfully testing ODK Aggregate, I am now encountering a
server problem, using the same version of ODK (1.2) and the same form(s).
When I try to login to my naxosarch.appspot.com instance, the
server goes into a loop, starting here:

https://urldefense.proofpoint.com/v2/url?u=https-3A__naxosarch.app
spot.com_Aggregate.html&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH
_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiy
ZjHv7_nxDMQdP07PE&s=6USOoHjz9yJD8Q1_d_6kMoDVG3cIyXHwq5Dwmy0XctA&e=

and then trying to load this:
https://urldefense.proofpoint.com/v2/url?u=https-3A__naxosarch.app
spot.com_Aggregate.html-23submissions_filter___&d=DwIBaQ&c=0u3nQZw
m2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eG
P4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=fN9IZHphyTDPwITRV60557
cNJOIEotpC_zi66aysDMQ&e=

Neither fully loads, and it just cycles between them, giving me no
ability to act at all. Trying to upload forms from a tablet also
produces an error.

I'm at a bit of a loss. Has anyone experienced this, and/or have
any suggestions?

Thanks,

Dan

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options:
https://urldefense.proofpoint.com/v2/url?u=http-3A__groups.google.
com_group_opendatakit-3Fhl-3Den&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&
r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCssk
x5qtLjiyZjHv7_nxDMQdP07PE&s=NbOMWBUutd39g-igS7h56cc6_PNAESPnpgATvF
uiF3o&e=

You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it,
send an email to opendatakit...@googlegroups.com.

For more options, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_groups_opt-5Fout&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=0i2MpsQElV2bnvVM2cw_jUHQh64--IBr94qf6lQhX44&e= .

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options:
https://urldefense.proofpoint.com/v2/url?u=http-3A__groups.google.
com_group_opendatakit-3Fhl-3Den&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&
r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCssk
x5qtLjiyZjHv7_nxDMQdP07PE&s=NbOMWBUutd39g-igS7h56cc6_PNAESPnpgATvF
uiF3o&e=

You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it,
send an email to opendatakit...@googlegroups.com.

For more options, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_groups_opt-5Fout&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=0i2MpsQElV2bnvVM2cw_jUHQh64--IBr94qf6lQhX44&e= .

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hi Mitch,
I am having the same problem, how do I go about correcting it?
Sincerely,
Sam

--

Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options:
https://urldefense.proofpoint.com/v2/url?u=http-3A__groups.google.co
m_group_opendatakit-3Fhl-3Den&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=es
qndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLj
iyZjHv7_nxDMQdP07PE&s=NbOMWBUutd39g-igS7h56cc6_PNAESPnpgATvFuiF3o&e=

You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to opendatakit...@googlegroups.com.
For more options, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_groups_opt-5Fout&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=0i2MpsQElV2bnvVM2cw_jUHQh64--IBr94qf6lQhX44&e= .

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options:
https://urldefense.proofpoint.com/v2/url?u=http-3A__groups.google.com_
group_opendatakit-3Fhl-3Den&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH
_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv
7_nxDMQdP07PE&s=NbOMWBUutd39g-igS7h56cc6_PNAESPnpgATvFuiF3o&e=

You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=CwlMb68IJzcF09k7-Fae2Jv7LJT3w7GW60L3Lk7Ya2Y&e= .

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: https://urldefense.proofpoint.com/v2/url?u=http-3A__groups.google.com_group_opendatakit-3Fhl-3Den&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=NbOMWBUutd39g-igS7h56cc6_PNAESPnpgATvFuiF3o&e=

You received this message because you are subscribed to a topic in the Google Groups "ODK Community" group.
To unsubscribe from this topic, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_topic_opendatakit_dKAqdtqZBEM_unsubscribe&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=vHjPfbKmXa0jlpeT3Ic79_0a8rL4JBGZH9jMu02BqdA&e= .
To unsubscribe from this group and all its topics, send an email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_d_optout&d=DwIBaQ&c=0u3nQZwm2He4OdaqbWh55g&r=esqndH_etIHpQ7iw90NwIgzhly0Tl3auqWD0XPDO0sE&m=eGP4tixqcFJGRcCsskx5qtLjiyZjHv7_nxDMQdP07PE&s=CwlMb68IJzcF09k7-Fae2Jv7LJT3w7GW60L3Lk7Ya2Y&e= .