Hi Everyone,
What is causing ODK Aggregate (v1.4.5) JSON publish gave published status
PAUSED to my local Z-ALPHA JSON Server?
Best,
If your JSON server rejects the published data from ODK Aggregate, then ODK
Aggregate will enter a PAUSED state.
Also, look in your server logs for other causes (e.g., corrupted data
records).
On the Forms Management / Published Data sub-tab, you should be able to
click the "Paused" button to restart the publishing.
···
On Tue, May 10, 2016 at 4:29 AM, Husni Mubarok wrote:Hi Everyone,
What is causing ODK Aggregate (v1.4.5) JSON publish gave published status
PAUSED to my local Z-ALPHA JSON Server?Best,
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
What does 'Active_Pause' status mean. Also, why will a form status be 'Active' but the published through date and time is empty? I'm trying to publish a form to Z-Alpha JSON Server.
···
On Tuesday, 10 May 2016 12:29:40 UTC+1, Husni Mubarok wrote: > Hi Everyone, > > > What is causing ODK Aggregate (v1.4.5) JSON publish gave published status PAUSED to my local Z-ALPHA JSON Server? > > > Best,There is not a PAUSED button, it is only text, is there any other way to restart a paused publisher?
It might be Active without a published-through date if there are no
submissions for that form, or, if after setting up streaming, there have
been no new submissions received that have been successfully sent to the
JSON server.
There can be a 6-30 second delay between the receipt of a submission and
its publishing through to the server.
This is to minimize quota consumption on AppEngine.
The general state machine is:
*Active *
|
(downstream server failure)
|
V
Active_Pause
|
(~90+ second delay)
|
V
Active_Retry
|
(downstream server failure)
|
V
Paused
|
(~15+ minute delay)
|
V
Active_Retry
And, whenever there is a successful transmission, the state goes back to
Active.
Active_Pause for Fusion Tables only sleeps 60 seconds, as this is a
commonly triggered by Google's publishing-rate-quota limits.
···
On Fri, Mar 10, 2017 at 3:13 AM, wrote:On Tuesday, 10 May 2016 12:29:40 UTC+1, Husni Mubarok wrote:
Hi Everyone,
What is causing ODK Aggregate (v1.4.5) JSON publish gave published
status PAUSED to my local Z-ALPHA JSON Server?Best,
What does 'Active_Pause' status mean. Also, why will a form status be
'Active' but the published through date and time is empty? I'm trying to
publish a form to Z-Alpha JSON Server.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
With ODK Aggregate 1.4.13, the PAUSED state now has a button. PAUSED
publishers attempt to resume about once every 8-10 minutes, so there is no
need to press the new button to resume them, but it is extremely useful
when diagnosing publishing problems to, e.g., your own JSON server.
···
On Thu, Jun 23, 2016 at 11:49 PM, wrote:There is not a PAUSED button, it is only text, is there any other way to
restart a paused publisher?--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
And the transition out of Paused can be delayed further if there are no
incoming submissions (on any form), or if the
Disable faster background actions (exports, publishing, form deletion)
(slows quota usage on Google AppEngine)
checkbox is checked.
···
On Fri, Mar 10, 2017 at 9:48 AM, Mitch Sundt wrote:It might be Active without a published-through date if there are no
submissions for that form, or, if after setting up streaming, there have
been no new submissions received that have been successfully sent to the
JSON server.There can be a 6-30 second delay between the receipt of a submission and
its publishing through to the server.This is to minimize quota consumption on AppEngine.
The general state machine is:
*Active * |(downstream server failure)
|
V
Active_Pause
|
(~90+ second delay)
|
V
Active_Retry
|
(downstream server failure)
|
V
Paused
|
(~15+ minute delay)
|
V
Active_RetryAnd, whenever there is a successful transmission, the state goes back to
Active.Active_Pause for Fusion Tables only sleeps 60 seconds, as this is a
commonly triggered by Google's publishing-rate-quota limits.On Fri, Mar 10, 2017 at 3:13 AM, popeoba@gmail.com wrote:
On Tuesday, 10 May 2016 12:29:40 UTC+1, Husni Mubarok wrote:
Hi Everyone,
What is causing ODK Aggregate (v1.4.5) JSON publish gave published
status PAUSED to my local Z-ALPHA JSON Server?Best,
What does 'Active_Pause' status mean. Also, why will a form status be
'Active' but the published through date and time is empty? I'm trying to
publish a form to Z-Alpha JSON Server.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com
--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com