I can't log into my odk aggregate account

Hello,

I have install the odk aggregate on my computer, and i have tried
logging in, but it keeps on giving me errors.It gives me the following
information (A username and password are being requested by
https://sph-99.appspot.com. The site says: "Pinno ODK Aggregate")

I am looking for a means to resit my password. I don't remember what
i used as my odk aggregate password. This is my URL:
http://sph-99.appspot.com/

I dont have the portion that has the heading: Permissions, with me.
your prompt response on the issue will be very much appreciated

Please i need your help

Best regards

First, ODK Aggregate is not installed on your computer -- you ran the
installer which uploaded it to Google AppEngine.

The installer does not install anything on your computer -- it just creates
and places configuration files and tools in the directory that you specify,
and then, in the case of Google AppEngine, it launches those tools to
upload the files to Google's cloud.

If you do not remember the password that you used, re-run the installer
(including uploading the changes to Google's cloud), and specify a
different username as the super-user username.

Then log in with that username (the initial password is aggregate).

Then you can change the password on your old username or delete it, etc.

··· On Mon, Jan 18, 2016 at 10:51 AM, NANA KWAME wrote:

Hello,

I have install the odk aggregate on my computer, and i have tried
logging in, but it keeps on giving me errors.It gives me the following
information (A username and password are being requested by
https://sph-99.appspot.com. The site says: "Pinno ODK Aggregate")

I am looking for a means to resit my password. I don't remember what
i used as my odk aggregate password. This is my URL:
http://sph-99.appspot.com/

I dont have the portion that has the heading: Permissions, with me.
your prompt response on the issue will be very much appreciated

Please i need your help

Best regards

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

I think, information about default password has to be added to manual.

··· вторник, 19 января 2016 г., 22:53:14 UTC+4 пользователь Mitch Sundt написал: > > First, ODK Aggregate is not installed on your computer -- you ran the > installer which uploaded it to Google AppEngine. > > The installer does not install anything on your computer -- it just > creates and places configuration files and tools in the directory that you > specify, and then, in the case of Google AppEngine, it launches those tools > to upload the files to Google's cloud. > > If you do not remember the password that you used, re-run the installer > (including uploading the changes to Google's cloud), and specify a > different username as the super-user username. > > Then log in with that username (the initial password is *aggregate*). > > Then you can change the password on your old username or delete it, etc. > > > > On Mon, Jan 18, 2016 at 10:51 AM, NANA KWAME <admission...@gmail.com > wrote: > >> Hello, >> >> I have install the odk aggregate on my computer, and i have tried >> logging in, but it keeps on giving me errors.It gives me the following >> information (A username and password are being requested by >> https://sph-99.appspot.com. The site says: "Pinno ODK Aggregate") >> >> I am looking for a means to resit my password. I don't remember what >> i used as my odk aggregate password. This is my URL: >> http://sph-99.appspot.com/ >> >> I dont have the portion that has the heading: Permissions, with me. >> your prompt response on the issue will be very much appreciated >> >> Please i need your help >> >> >> Best regards >> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Mitch Sundt > Software Engineer > University of Washington > mitche...@gmail.com >

https://opendatakit.org/use/aggregate/#Using_the_Application

Step 4

··· On Fri, Jan 22, 2016 at 1:41 AM, wrote:

I think, information about default password has to be added to manual.

вторник, 19 января 2016 г., 22:53:14 UTC+4 пользователь Mitch Sundt
написал:

First, ODK Aggregate is not installed on your computer -- you ran the
installer which uploaded it to Google AppEngine.

The installer does not install anything on your computer -- it just
creates and places configuration files and tools in the directory that you
specify, and then, in the case of Google AppEngine, it launches those tools
to upload the files to Google's cloud.

If you do not remember the password that you used, re-run the installer
(including uploading the changes to Google's cloud), and specify a
different username as the super-user username.

Then log in with that username (the initial password is aggregate).

Then you can change the password on your old username or delete it, etc.

On Mon, Jan 18, 2016 at 10:51 AM, NANA KWAME admission...@gmail.com wrote:

Hello,

I have install the odk aggregate on my computer, and i have tried
logging in, but it keeps on giving me errors.It gives me the following
information (A username and password are being requested by
https://sph-99.appspot.com. The site says: "Pinno ODK Aggregate")

I am looking for a means to resit my password. I don't remember what
i used as my odk aggregate password. This is my URL:
http://sph-99.appspot.com/

I dont have the portion that has the heading: Permissions, with me.
your prompt response on the issue will be very much appreciated

Please i need your help

Best regards

--

Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com

https://opendatakit.org/use/aggregate/#Using_the_Application

Step 4

I think, information about default password has to be added to manual.

First, ODK Aggregate is not installed on your computer -- you ran the installer which uploaded it to Google AppEngine.

The installer does not install anything on your computer -- it just creates and places configuration files and tools in the directory that you specify, and then, in the case of Google AppEngine, it launches those tools to upload the files to Google's cloud.

If you do not remember the password that you used, re-run the installer (including uploading the changes to Google's cloud), and specify a different username as the super-user username.

Then log in with that username (the initial password is aggregate).

Then you can change the password on your old username or delete it, etc.

Hello,

I have install the odk aggregate on my computer, and i have tried

logging in, but it keeps on giving me errors.It gives me the following

information (A username and password are being requested by

https://sph-99.appspot.com. The site says: "Pinno ODK Aggregate")

I am looking for a means to resit my password. I don't remember what

i used as my odk aggregate password. This is my URL:

http://sph-99.appspot.com/

I dont have the portion that has the heading: Permissions, with me.

your prompt response on the issue will be very much appreciated

Please i need your help

Best regards

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hello Mitch Sundt

Am having problems with the login to my ODK aggregate.
After typing in my username and in type in aggregate as password it gives me error or does not accept the password, please help.

··· On Friday, January 22, 2016 at 4:26:12 PM UTC, Mitch Sundt wrote: > On Fri, Jan 22, 2016 at 1:41 AM, wrote: > вторник, 19 января 2016 г., 22:53:14 UTC+4 пользователь Mitch Sundt написал: > On Mon, Jan 18, 2016 at 10:51 AM, NANA KWAME wrote:

Please read the e-mail chain that comes up from a search before adding to
it.

If you do not remember the password that you used, re-run the installer
(including uploading the changes to Google's cloud), and specify a
different username as the super-user username.

Then log in with that username (the initial password is aggregate).

Then you can change the password on your old username or delete it, etc.

··· On Thu, Feb 9, 2017 at 11:20 AM, wrote:

On Friday, January 22, 2016 at 4:26:12 PM UTC, Mitch Sundt wrote:

https://opendatakit.org/use/aggregate/#Using_the_Application

Step 4

On Fri, Jan 22, 2016 at 1:41 AM, issa...@gmail.com wrote:

I think, information about default password has to be added to manual.

вторник, 19 января 2016 г., 22:53:14 UTC+4 пользователь Mitch Sundt
написал:
First, ODK Aggregate is not installed on your computer -- you ran the
installer which uploaded it to Google AppEngine.

The installer does not install anything on your computer -- it just
creates and places configuration files and tools in the directory that you
specify, and then, in the case of Google AppEngine, it launches those tools
to upload the files to Google's cloud.

If you do not remember the password that you used, re-run the installer
(including uploading the changes to Google's cloud), and specify a
different username as the super-user username.

Then log in with that username (the initial password is aggregate).

Then you can change the password on your old username or delete it, etc.

On Mon, Jan 18, 2016 at 10:51 AM, NANA KWAME admission...@gmail.com wrote:
Hello,

I have install the odk aggregate on my computer, and i have tried

logging in, but it keeps on giving me errors.It gives me the following

information (A username and password are being requested by

https://sph-99.appspot.com. The site says: "Pinno ODK Aggregate")

I am looking for a means to resit my password. I don't remember what

i used as my odk aggregate password. This is my URL:

http://sph-99.appspot.com/

I dont have the portion that has the heading: Permissions, with me.

your prompt response on the issue will be very much appreciated

Please i need your help

Best regards

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

--

--

Post: opend...@googlegroups.com

Unsubscribe: opendatakit...@googlegroups.com

Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google
Groups "ODK Community" group.

To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Mitch Sundt
Software Engineer
University of Washington
mitche...@gmail.com

Hello Mitch Sundt

Am having problems with the login to my ODK aggregate.
After typing in my username and in type in aggregate as password it gives
me error or does not accept the password, please help.

--

Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en


You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Mitch Sundt
Software Engineer
University of Washington
mitchellsundt@gmail.com