We are in middle of data collection. After adding few variables to a form,
the form won't open from the Build. Any help would be deeply appreciated.
Thanks.
can we see the form? can you describe a bit better the form caracteristics?
thanks
escribió:
···
El El Tue, Feb 3, 2015 a las 21:09, Wen LiangWe are in middle of data collection. After adding few variables to a
form, the form won't open from the Build. Any help would be deeply
appreciated. Thanks.--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I am still hoping if anyone could help me to save this form somehow. Thank
you in advance.
···
On Tuesday, February 3, 2015 at 3:09:23 PM UTC-5, Wen Liang wrote: > > We are in middle of data collection. After adding few variables to a > form, the form won't open from the Build. Any help would be deeply > appreciated. Thanks. >Thank you for the prompt reply. There are many skips in the form. Those
are not in the Word doc. Do you still need to see it? or did I answer
your question about the characteristics? Thanks
···
On Tuesday, February 3, 2015 at 3:41:08 PM UTC-5, Angelo Lazzari wrote: > > can we see the form? can you describe a bit better the form caracteristics? > > thanks > El El Tue, Feb 3, 2015 a las 21:09, Wen Liang > escribió: > >> We are in middle of data collection. After adding few variables to a >> form, the form won't open from the Build. Any help would be deeply >> appreciated. Thanks. >> >> -- >> -- >> Post: opend...@googlegroups.com >> Unsubscribe: opendatakit...@googlegroups.com >> Options: http://groups.google.com/group/opendatakit?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "ODK Community" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to opendatakit...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> >Sorry I forgot to mention. there are over 700 variables in the form...
most of the variables are selects...
···
On Tuesday, February 3, 2015 at 3:46:39 PM UTC-5, Wen Liang wrote: > > Thank you for the prompt reply. There are many skips in the form. Those > are not in the Word doc. Do you still need to see it? or did I answer > your question about the characteristics? Thanks > > On Tuesday, February 3, 2015 at 3:41:08 PM UTC-5, Angelo Lazzari wrote: >> >> can we see the form? can you describe a bit better the form >> caracteristics? >> >> thanks >> El El Tue, Feb 3, 2015 a las 21:09, Wen Liang >> escribió: >> >>> We are in middle of data collection. After adding few variables to a >>> form, the form won't open from the Build. Any help would be deeply >>> appreciated. Thanks. >>> >>> -- >>> -- >>> Post: opend...@googlegroups.com >>> Unsubscribe: opendatakit...@googlegroups.com >>> Options: http://groups.google.com/group/opendatakit?hl=en >>> >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "ODK Community" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to opendatakit...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >>most of them are selects with a lot of options? did you monitor the device
memory?
the problem started with a precise version of odk?
which version are you using?
Angelo
escribió:
···
El El Tue, Feb 3, 2015 a las 21:49, Wen LiangSorry I forgot to mention. there are over 700 variables in the form...
most of the variables are selects...On Tuesday, February 3, 2015 at 3:46:39 PM UTC-5, Wen Liang wrote:
Thank you for the prompt reply. There are many skips in the form. Those
are not in the Word doc. Do you still need to see it? or did I answer
your question about the characteristics? ThanksOn Tuesday, February 3, 2015 at 3:41:08 PM UTC-5, Angelo Lazzari wrote:
can we see the form? can you describe a bit better the form
caracteristics?thanks
El El Tue, Feb 3, 2015 a las 21:09, Wen Liang wenlia...@gmail.com
escribió:We are in middle of data collection. After adding few variables to a
form, the form won't open from the Build. Any help would be deeply
appreciated. Thanks.--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Wen,
I've sent a note to Clint (the creator of ODK Build) to see if he can
help. I'm sure he'll reach out when he gets a chance.
If this is an emergency, your best best is to hire help at
https://opendatakit.org/help/help-for-hire/.
Yaw
···
On Wed, Feb 4, 2015 at 11:23 AM, Wen Liang wrote: > I am still hoping if anyone could help me to save this form somehow. Thank > you in advance. > > > On Tuesday, February 3, 2015 at 3:09:23 PM UTC-5, Wen Liang wrote: >> >> We are in middle of data collection. After adding few variables to a >> form, the form won't open from the Build. Any help would be deeply >> appreciated. Thanks. > > -- > -- > Post: opendatakit@googlegroups.com > Unsubscribe: opendatakit+unsubscribe@googlegroups.com > Options: http://groups.google.com/group/opendatakit?hl=en > > --- > You received this message because you are subscribed to the Google Groups > "ODK Community" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to opendatakit+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.We didn't notice any problem in ODK collect. We are not able to open the
form from http://build.opendatakit.org/. Our user name is dfidnep if you
have access to the Build module.
Did I answer your question? Thanks,
Wen
···
On Tuesday, February 3, 2015 at 4:26:08 PM UTC-5, Angelo Lazzari wrote: > > most of them are selects with a lot of options? did you monitor the device > memory? > > the problem started with a precise version of odk? > > which version are you using? > > Angelo > El El Tue, Feb 3, 2015 a las 21:49, Wen Liang > escribió: > >> Sorry I forgot to mention. there are over 700 variables in the form... >> most of the variables are selects... >> >> On Tuesday, February 3, 2015 at 3:46:39 PM UTC-5, Wen Liang wrote: >>> >>> Thank you for the prompt reply. There are many skips in the form. >>> Those are not in the Word doc. Do you still need to see it? or did I >>> answer your question about the characteristics? Thanks >>> >>> On Tuesday, February 3, 2015 at 3:41:08 PM UTC-5, Angelo Lazzari wrote: >>>> >>>> can we see the form? can you describe a bit better the form >>>> caracteristics? >>>> >>>> thanks >>>> El El Tue, Feb 3, 2015 a las 21:09, Wen Liang >>>> escribió: >>>> >>>>> We are in middle of data collection. After adding few variables to a >>>>> form, the form won't open from the Build. Any help would be deeply >>>>> appreciated. Thanks. >>>>> >>>>> -- >>>>> -- >>>>> Post: opend...@googlegroups.com >>>>> Unsubscribe: opendatakit...@googlegroups.com >>>>> Options: http://groups.google.com/group/opendatakit?hl=en >>>>> >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ODK Community" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to opendatakit...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>ouch, i'm sorry i misunderstood you're question, i thought it was about the
ODK collect.i cannot help you so. Bye
Angelo
···
Il giorno Tue Feb 03 2015 at 22:30:32 Wen Liang ha scritto:We didn't notice any problem in ODK collect. We are not able to open the
form from http://build.opendatakit.org/. Our user name is dfidnep if you
have access to the Build module.
Did I answer your question? Thanks,
WenOn Tuesday, February 3, 2015 at 4:26:08 PM UTC-5, Angelo Lazzari wrote:
most of them are selects with a lot of options? did you monitor the
device memory?the problem started with a precise version of odk?
which version are you using?
Angelo
El El Tue, Feb 3, 2015 a las 21:49, Wen Liang wenlia...@gmail.com
escribió:
Sorry I forgot to mention. there are over 700 variables in the form...
most of the variables are selects...
On Tuesday, February 3, 2015 at 3:46:39 PM UTC-5, Wen Liang wrote:
Thank you for the prompt reply. There are many skips in the form.
Those are not in the Word doc. Do you still need to see it? or did I
answer your question about the characteristics? ThanksOn Tuesday, February 3, 2015 at 3:41:08 PM UTC-5, Angelo Lazzari wrote:
can we see the form? can you describe a bit better the form
caracteristics?thanks
El El Tue, Feb 3, 2015 a las 21:09, Wen Liang wenlia...@gmail.com
escribió:We are in middle of data collection. After adding few variables to a
form, the form won't open from the Build. Any help would be deeply
appreciated. Thanks.--
Post: opend...@googlegroups.com
Unsubscribe: opendatakit...@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google
Groups "ODK Community" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to opendatakit...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
--
Post: opendatakit@googlegroups.com
Unsubscribe: opendatakit+unsubscribe@googlegroups.com
Options: http://groups.google.com/group/opendatakit?hl=en
You received this message because you are subscribed to the Google Groups
"ODK Community" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to opendatakit+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Thank you so much Yaw! Clint contacted me and I am looking forward to the
help and solution.
Wen